Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Freezer Won't Make Ice? Ice Maker Assembly #W10190965
Whirlpool Freezer Won't Make Ice? Ice Maker Assembly #W10190965
Skill Level
Total Parts Cost
$75.34Estimated Savings
$112.5003:02
- Description
This video provides step-by-step repair instructions for installing the ice maker assembly on a Whirlpool refrigerator. The most common reasons for replacing the ice maker assembly is when the fridge ice maker is not working or is overflowing.
All of the information for this ice maker assembly replacement video is applicable to the following brands:
Whirlpool, Kenmore, Amana, Estate, Maytag, Crosley, Ikea, Inglis, KitchenAid, Roper
Tools needed: multi screwdriver, small slotted screwdriver
All of the information for this ice maker assembly replacement video is applicable to the following brands:
Whirlpool, Kenmore, Amana, Estate, Maytag, Crosley, Ikea, Inglis, KitchenAid, Roper
Tools needed: multi screwdriver, small slotted screwdriver
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker assembly in your freezer first remove the ice bucket.
3
Now lift up the ice access door and pull off the icemaker cover
4
Remove the bottom screw securing the icemaker assembly mounting bracket.
5
Now loosen the top screws and lift the assembly off of the screws.
6
Be aware the ice tray will be filled with water or ice.
7
Next, release the thermal fuse from the retaining clip.
8
Depress the retaining tab to release the wire harness and remove the old icemaker assembly from the freezer.
9
Prepare the new icemaker assembly for installation by first removing the attached wire harness.
10
This won’t be needed for your model.
11
Now transfer the ice level arm from the old assembly to the new one.
12
Returning to the freezer compartment, snap the wire harness into place on the new assembly and secure the thermal fuse under the retaining clip.
13
Align the fill cup with the water spout as you position the assembly on the screws.
14
Tighten the screws and replace the bottom screw to secure the assembly mounting bracket.
15
Snap the cover onto the icemaker and close the ice access door.
16
Replace the ice bucket by aligning it on the rails and sliding it into place.
17
If you have trouble positioning the bucket you can rotate the auger to fully seat the drive coupler.
18
You’re now ready to plug the power cord back in and confirm that new icemaker is working properly.
Description
This video provides step-by-step repair instructions for installing the ice maker assembly on a Whirlpool refrigerator. The most common reasons for replacing the ice maker assembly is when the fridge ice maker is not working or is overflowing.
All of the information for this ice maker assembly replacement video is applicable to the following brands:
Whirlpool, Kenmore, Amana, Estate, Maytag, Crosley, Ikea, Inglis, KitchenAid, Roper
Tools needed: multi screwdriver, small slotted screwdriver
All of the information for this ice maker assembly replacement video is applicable to the following brands:
Whirlpool, Kenmore, Amana, Estate, Maytag, Crosley, Ikea, Inglis, KitchenAid, Roper
Tools needed: multi screwdriver, small slotted screwdriver
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker assembly in your freezer first remove the ice bucket.
3
Now lift up the ice access door and pull off the icemaker cover
4
Remove the bottom screw securing the icemaker assembly mounting bracket.
5
Now loosen the top screws and lift the assembly off of the screws.
6
Be aware the ice tray will be filled with water or ice.
7
Next, release the thermal fuse from the retaining clip.
8
Depress the retaining tab to release the wire harness and remove the old icemaker assembly from the freezer.
9
Prepare the new icemaker assembly for installation by first removing the attached wire harness.
10
This won’t be needed for your model.
11
Now transfer the ice level arm from the old assembly to the new one.
12
Returning to the freezer compartment, snap the wire harness into place on the new assembly and secure the thermal fuse under the retaining clip.
13
Align the fill cup with the water spout as you position the assembly on the screws.
14
Tighten the screws and replace the bottom screw to secure the assembly mounting bracket.
15
Snap the cover onto the icemaker and close the ice access door.
16
Replace the ice bucket by aligning it on the rails and sliding it into place.
17
If you have trouble positioning the bucket you can rotate the auger to fully seat the drive coupler.
18
You’re now ready to plug the power cord back in and confirm that new icemaker is working properly.
Applicable Product Model
Parts Needed
Ice Maker Assembly
$75.34
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com