Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Dryer Start Switch Replacement #3977456
Whirlpool/Kenmore Dryer Start Switch Replacement #3977456
Skill Level
Total Parts Cost
$31.26Estimated Savings
$112.5001:38
- Description
This video provides step-by-step instructions for replacing the start switch on Whirlpool gas dryers. The most common reasons for replacing the start switch are when the dryer won’t start or starts too soon.
All of the information in this switch replacement video is applicable to the following brands: Kenmore, Whirlpool, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef
Tools used: hex socket, flat head screwdriver, putty knife
All of the information in this switch replacement video is applicable to the following brands: Kenmore, Whirlpool, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef
Tools used: hex socket, flat head screwdriver, putty knife
Step By Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the start switch knob. This may require some effort -
3
You can use string or wire to help pry it off.
4
Next, detach the control panel.
5
Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
6
Now, rotate the control panel up.
7
Push the tab to release the start switch.
8
Disconnect the wires. You’re now ready to install the new start switch.
9
Reattach the wires then insert the switch into the control panel and push the tab back into the slot.
10
Rotate the control panel back down, and snap it into place.
11
If applicable, replace the screws and end caps.
12
Reinstall the start switch knob and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the start switch on Whirlpool gas dryers. The most common reasons for replacing the start switch are when the dryer won’t start or starts too soon.
All of the information in this switch replacement video is applicable to the following brands: Kenmore, Whirlpool, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef
Tools used: hex socket, flat head screwdriver, putty knife
All of the information in this switch replacement video is applicable to the following brands: Kenmore, Whirlpool, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef
Tools used: hex socket, flat head screwdriver, putty knife
Step-By-Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the start switch knob. This may require some effort -
3
You can use string or wire to help pry it off.
4
Next, detach the control panel.
5
Depending on your model, you will either insert a putty knife under the panel to release the two clips or you will pull off both plastic end caps and remove the screws found underneath.
6
Now, rotate the control panel up.
7
Push the tab to release the start switch.
8
Disconnect the wires. You’re now ready to install the new start switch.
9
Reattach the wires then insert the switch into the control panel and push the tab back into the slot.
10
Rotate the control panel back down, and snap it into place.
11
If applicable, replace the screws and end caps.
12
Reinstall the start switch knob and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Start Switch
$31.26
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com