Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Light Board Assembly Replacement #EAV62052204
LG Refrigerator Light Board Assembly Replacement #EAV62052204
Skill Level
Total Parts Cost
$143.77Estimated Savings
$112.5002:01
- Description
This video provides step-by-step instructions for replacing the LED light board on LG refrigerators. The most common reason for replacing the light board is when it does not light up when a door is opened but the door switches are working properly.
All the information in this light board replacement video is applicable to the following brands: LG, Kenmore
Tools used: multi-screwdriver, Phillips head bit, small flat-head screwdriver
All the information in this light board replacement video is applicable to the following brands: LG, Kenmore
Tools used: multi-screwdriver, Phillips head bit, small flat-head screwdriver
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the light board in your refrigerator, open both doors and use a phillips-head screwdriver to remove the screws securing the light assembly.
3
Pull the assembly down and forward. and disconnect the wire harness.
4
Now use a small flathead screwdriver to help pry off the cover.
5
Remove the screws securing the old light board and pull the board out.
6
Install the new light board by first inserting the wire harness through the hole in the housing then position the new board and secure it with the screws.
7
Realign the lens cover and snap it into place.
8
Reinstall the light assembly by reconnecting the wire harness and inserting the assembly tabs into the slots in the liner.
9
Replace the screws to secure.
10
You’re now ready to plug the power cord back in and confirm that the new light works properly.
Description
This video provides step-by-step instructions for replacing the LED light board on LG refrigerators. The most common reason for replacing the light board is when it does not light up when a door is opened but the door switches are working properly.
All the information in this light board replacement video is applicable to the following brands: LG, Kenmore
Tools used: multi-screwdriver, Phillips head bit, small flat-head screwdriver
All the information in this light board replacement video is applicable to the following brands: LG, Kenmore
Tools used: multi-screwdriver, Phillips head bit, small flat-head screwdriver
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the light board in your refrigerator, open both doors and use a phillips-head screwdriver to remove the screws securing the light assembly.
3
Pull the assembly down and forward. and disconnect the wire harness.
4
Now use a small flathead screwdriver to help pry off the cover.
5
Remove the screws securing the old light board and pull the board out.
6
Install the new light board by first inserting the wire harness through the hole in the housing then position the new board and secure it with the screws.
7
Realign the lens cover and snap it into place.
8
Reinstall the light assembly by reconnecting the wire harness and inserting the assembly tabs into the slots in the liner.
9
Replace the screws to secure.
10
You’re now ready to plug the power cord back in and confirm that the new light works properly.
Applicable Product Model
Parts Needed
LED Light
$143.77
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com