Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Fuse Assembly Replacement #8065573
Asko Washer Fuse Assembly Replacement #8065573
Skill Level
Total Parts Cost
$32.40Estimated Savings
$112.5002:02
- Description
This video provides step-by-step repair instructions for replacing the fuse assembly (fuse and holder) on an Asko washing machine. The most common reason for replacing the fuse assembly is when the washer won’t start.
All of the information for this fuse assembly replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, flat head screwdriver
All of the information for this fuse assembly replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, flat head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace a fuse assembly in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Disconnect the wires from the fuse assembly you’re replacing.
5
Now use a flathead screwdriver to depress the tabs holding the fuse holder in place and pull the old assembly out of the frame.
6
Install the new fuse assembly by inserting it through the bottom of the frame and snapping it into place.
7
Connect the wires to the appropriate terminals.
8
Make sure the support rail is in place.
9
Now slide the front edge of the top panel under the control panel.
10
Align the panel with the support rail and the pins on the frame then push down.
11
Replace the screws in the back.
12
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the fuse assembly (fuse and holder) on an Asko washing machine. The most common reason for replacing the fuse assembly is when the washer won’t start.
All of the information for this fuse assembly replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, flat head screwdriver
All of the information for this fuse assembly replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, flat head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace a fuse assembly in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Disconnect the wires from the fuse assembly you’re replacing.
5
Now use a flathead screwdriver to depress the tabs holding the fuse holder in place and pull the old assembly out of the frame.
6
Install the new fuse assembly by inserting it through the bottom of the frame and snapping it into place.
7
Connect the wires to the appropriate terminals.
8
Make sure the support rail is in place.
9
Now slide the front edge of the top panel under the control panel.
10
Align the panel with the support rail and the pins on the frame then push down.
11
Replace the screws in the back.
12
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Recommended Tools and Accessories
Multimeter
$53.76
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com