Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Washing Machine Main Control Board #DC92-01063A
Samsung Washing Machine Main Control Board #DC92-01063A
Skill Level
Total Parts Cost
$472.87Estimated Savings
$112.5003:14
- Description
This video provides step-by-step instructions for replacing the main control board on Samsung washing machines. The main reasons for replacing the main control board is if the washer won’t start, stops mid-cycle, or won’t lock its door, and more commonly defective components prove not to be at fault.
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
To replace the main control board in your washer, first remove the screws securing the rear panel.
2
Now shift the panel up and pull it out from the bottom to remove.
3
Next, remove the mounting screws securing the control board housing.
4
Slide the housing to the left to detach it from the cabinet.
5
Remove the top cover.
6
You’re now ready to install the new main control board.
7
First, disconnect the transformer wire connecter from the old board and remove the mounting screw securing the transformer.
8
Position the transformer on the new control board housing and secure it with the screw.
9
Connect the wire connecter to the new board.
10
Now transfer the remaining wire connecters from the old board to the new one.
11
With all of the wires in place, position the wire harness in the groove in the housing.
12
Snap on the cover.
13
Position the housing by inserting the tabs into the cabinet slots then slide the housing to the right.
14
Replace the mounting screws to secure.
15
Reinstall the rear panel by inserting the upper tabs into the slots then align the lower tabs and push the panel down.
16
Replace the screws.
17
With the repair completed, plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the main control board on Samsung washing machines. The main reasons for replacing the main control board is if the washer won’t start, stops mid-cycle, or won’t lock its door, and more commonly defective components prove not to be at fault.
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
To replace the main control board in your washer, first remove the screws securing the rear panel.
2
Now shift the panel up and pull it out from the bottom to remove.
3
Next, remove the mounting screws securing the control board housing.
4
Slide the housing to the left to detach it from the cabinet.
5
Remove the top cover.
6
You’re now ready to install the new main control board.
7
First, disconnect the transformer wire connecter from the old board and remove the mounting screw securing the transformer.
8
Position the transformer on the new control board housing and secure it with the screw.
9
Connect the wire connecter to the new board.
10
Now transfer the remaining wire connecters from the old board to the new one.
11
With all of the wires in place, position the wire harness in the groove in the housing.
12
Snap on the cover.
13
Position the housing by inserting the tabs into the cabinet slots then slide the housing to the right.
14
Replace the mounting screws to secure.
15
Reinstall the rear panel by inserting the upper tabs into the slots then align the lower tabs and push the panel down.
16
Replace the screws.
17
With the repair completed, plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com