Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Wall Oven Broil Element Replacement #7406P182-60
Maytag Wall Oven Broil Element Replacement #7406P182-60
Skill Level
Total Parts Cost
$87.47Estimated Savings
$112.5002:56
- Description
This video provides step-by-step instructions for replacing the broil element on Maytag and Magic Chef electric wall ovens. The most common reasons for replacing the broil element are when the broil element won’t turn off or won’t turn on or when the oven won’t heat or won’t bake evenly.
All of the information in this broil element replacement video is applicable to the following brands: Magic Chef, Maytag
Tools used: multi-screwdriver, Phillips head bit
All of the information in this broil element replacement video is applicable to the following brands: Magic Chef, Maytag
Tools used: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
Before you replace the broil element in your wall oven be sure to shut off the power supply to the oven.
2
Open the oven door to the broil position and lift the door off the hinge supports.
3
Remove the oven racks.
4
Now use a phillips-head screwdriver to remove the screws securing the front broil element support.
5
Slide the support off.
6
Next, remove the screws to release the rear support.
7
Pull the element forward to gain access to the wires and terminals.
8
If you are unable to access the wires, you will need to uninstall the oven from the cabinet and remove the rear panel.
9
Note the orientation of the wires then disconnect them from the old element.
10
Install the new broil element by first connecting the wires to the appropriate terminals.
11
Align the rear support on the rear wall of the oven and replace the screws to secure.
12
Slide the front support onto the element and secure it with the screws.
13
With the new broil element installed, replace the oven racks.
14
Reinstall the oven door by aligning it with the hinge supports and push the door into position.
15
With the repair completed, turn the power supply back on and your oven should be ready for use.
Description
This video provides step-by-step instructions for replacing the broil element on Maytag and Magic Chef electric wall ovens. The most common reasons for replacing the broil element are when the broil element won’t turn off or won’t turn on or when the oven won’t heat or won’t bake evenly.
All of the information in this broil element replacement video is applicable to the following brands: Magic Chef, Maytag
Tools used: multi-screwdriver, Phillips head bit
All of the information in this broil element replacement video is applicable to the following brands: Magic Chef, Maytag
Tools used: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
Before you replace the broil element in your wall oven be sure to shut off the power supply to the oven.
2
Open the oven door to the broil position and lift the door off the hinge supports.
3
Remove the oven racks.
4
Now use a phillips-head screwdriver to remove the screws securing the front broil element support.
5
Slide the support off.
6
Next, remove the screws to release the rear support.
7
Pull the element forward to gain access to the wires and terminals.
8
If you are unable to access the wires, you will need to uninstall the oven from the cabinet and remove the rear panel.
9
Note the orientation of the wires then disconnect them from the old element.
10
Install the new broil element by first connecting the wires to the appropriate terminals.
11
Align the rear support on the rear wall of the oven and replace the screws to secure.
12
Slide the front support onto the element and secure it with the screws.
13
With the new broil element installed, replace the oven racks.
14
Reinstall the oven door by aligning it with the hinge supports and push the door into position.
15
With the repair completed, turn the power supply back on and your oven should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com