Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Generator Brush Assembly Replacement #207827GS
Briggs & Stratton Generator Brush Assembly Replacement #207827GS
Skill Level
Total Parts Cost
$10.89Estimated Savings
$112.5002:24
- Description
This video provides step-by-step instructions for replacing the brush assembly on Briggs and Stratton generators. The most common reason for replacing the brush assembly is to make the motor run more smoothly.
All of the information in this brush assembly replacement video is applicable to the following brands: Briggs & Stratton
Tools used: multi-screwdriver, 5/16” socket, needle-nose pliers
All of the information in this brush assembly replacement video is applicable to the following brands: Briggs & Stratton
Tools used: multi-screwdriver, 5/16” socket, needle-nose pliers
Step By Step Instructions
1
Before you replace a brush assembly on your generator first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 5/16th inch socket to remove the screws securing the alternator cover and pull the cover off.
4
Next, remove the screw to release the voltage regulator connecter.
5
Detach the wires from the brush assembly.
6
Now, hold the assembly as you remove the mounting screw then lift out the old assembly.
7
Install the new brush assembly by aligning it on the support.
8
Replace the mounting screw to secure.
9
Connect the wires to the new assembly.
10
Reposition the voltage regulator connecter and secure it with the screw.
11
Replace the alternator cover by aligning it with the wire harness boot then replace the screws to secure.
12
Reattach the wire and boot to the spark plug and your generator should be ready for use.
Description
This video provides step-by-step instructions for replacing the brush assembly on Briggs and Stratton generators. The most common reason for replacing the brush assembly is to make the motor run more smoothly.
All of the information in this brush assembly replacement video is applicable to the following brands: Briggs & Stratton
Tools used: multi-screwdriver, 5/16” socket, needle-nose pliers
All of the information in this brush assembly replacement video is applicable to the following brands: Briggs & Stratton
Tools used: multi-screwdriver, 5/16” socket, needle-nose pliers
Step-By-Step Instructions
1
Before you replace a brush assembly on your generator first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 5/16th inch socket to remove the screws securing the alternator cover and pull the cover off.
4
Next, remove the screw to release the voltage regulator connecter.
5
Detach the wires from the brush assembly.
6
Now, hold the assembly as you remove the mounting screw then lift out the old assembly.
7
Install the new brush assembly by aligning it on the support.
8
Replace the mounting screw to secure.
9
Connect the wires to the new assembly.
10
Reposition the voltage regulator connecter and secure it with the screw.
11
Replace the alternator cover by aligning it with the wire harness boot then replace the screws to secure.
12
Reattach the wire and boot to the spark plug and your generator should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com