Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Washer Replace Circulation Pump #137389000
Frigidaire Affinity Washer Replace Circulation Pump #137389000
Skill Level
Total Parts Cost
$122.85Estimated Savings
$112.5005:34
- Description
This video provides step-by-step repair instructions for replacing the circulation pump on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the circulation pump are when the washer is loud during operation or isn’t cleaning dishes properly.
All of the information for this circulation pump replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
All of the information for this circulation pump replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
Step By Step Instructions
1
Before you replace the circulation pump in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the mounting screws securing the side panels to the main top.
5
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly.
6
Remove the bleach dispenser cover.
7
Use a phillips-head screwdriver to remove the screw securing the dispenser.
8
Depress the tabs to release the dispenser from the main top.
9
You can now lift up the main top and support it.
10
Now use the number two square-bit screwdriver to remove the screws securing the left side panel to the base and rear panel.
11
Use a phillips-head screwdriver to remove the top screw and move the panel out of the way.
12
Release the retaining clamps securing the inlet and outlet hoses to the pump and pull of the hoses – be prepared for some water to spill.
13
Use the number two square-bit screwdriver to remove the mounting screws securing the pump.
14
Disconnect the wires from the circulation pump and pull the old pump free.
15
Install the new circulation pump by first connecting the wires to the appropriate terminals.
16
Remember to secure the wires under the retaining clip
17
Align the pump on the base.
18
Then replace the mounting screws to secure it.
19
Attach the inlet and outlet hoses to the appropriate ports on the new pump and secure them with the clamps.
20
Reposition the side panel and replace all of the screws to secure.
21
Remove the support and lower the main top.
22
Confirm that the pins in the side of the panels are aligned with the holes in the top.
23
Snap the bleach dispenser into place on the main top.
24
Rethread the screw.
25
Replace the cover.
26
Next, secure the latch assembly in the main top.
27
Replace the front panel by inserting the panel tabs into the slots in the side panels.
28
Push the panel up into position and replace the mounting screws.
29
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the circulation pump on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the circulation pump are when the washer is loud during operation or isn’t cleaning dishes properly.
All of the information for this circulation pump replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
All of the information for this circulation pump replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the circulation pump in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the mounting screws securing the side panels to the main top.
5
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly.
6
Remove the bleach dispenser cover.
7
Use a phillips-head screwdriver to remove the screw securing the dispenser.
8
Depress the tabs to release the dispenser from the main top.
9
You can now lift up the main top and support it.
10
Now use the number two square-bit screwdriver to remove the screws securing the left side panel to the base and rear panel.
11
Use a phillips-head screwdriver to remove the top screw and move the panel out of the way.
12
Release the retaining clamps securing the inlet and outlet hoses to the pump and pull of the hoses – be prepared for some water to spill.
13
Use the number two square-bit screwdriver to remove the mounting screws securing the pump.
14
Disconnect the wires from the circulation pump and pull the old pump free.
15
Install the new circulation pump by first connecting the wires to the appropriate terminals.
16
Remember to secure the wires under the retaining clip
17
Align the pump on the base.
18
Then replace the mounting screws to secure it.
19
Attach the inlet and outlet hoses to the appropriate ports on the new pump and secure them with the clamps.
20
Reposition the side panel and replace all of the screws to secure.
21
Remove the support and lower the main top.
22
Confirm that the pins in the side of the panels are aligned with the holes in the top.
23
Snap the bleach dispenser into place on the main top.
24
Rethread the screw.
25
Replace the cover.
26
Next, secure the latch assembly in the main top.
27
Replace the front panel by inserting the panel tabs into the slots in the side panels.
28
Push the panel up into position and replace the mounting screws.
29
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com