Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Oven Won't Heat Up? Replace Oven Bake Element WB44T10011
GE Oven Won't Heat Up? Replace Oven Bake Element WB44T10011
Skill Level
Total Parts Cost
$84.57Estimated Savings
$112.5001:23
- Description
This video provides step-by-step repair instructions for replacing the oven bake element on a GE electric range. The most common reasons for replacing the bake element are when the oven doesn’t bake evenly, won’t heat, won’t turn off, or won’t turn on.
All of the information for this oven bake element replacement video is applicable to the following brands:
GE, Kenmore
Tools needed: 14” nut driver
All of the information for this oven bake element replacement video is applicable to the following brands:
GE, Kenmore
Tools needed: 14” nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, remove the mounting screws and carefully pull out the old bake element.
4
Disconnect the two wires and remove the old element.
5
Be aware that if you are unable to easily reach the wires you may need to remove the back panel to access them.
6
Install the new bake element by connecting the wires inserting the element into the oven cavity and securing the mounting screws.
7
Replace the back panel if necessary.
8
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the oven bake element on a GE electric range. The most common reasons for replacing the bake element are when the oven doesn’t bake evenly, won’t heat, won’t turn off, or won’t turn on.
All of the information for this oven bake element replacement video is applicable to the following brands:
GE, Kenmore
Tools needed: 14” nut driver
All of the information for this oven bake element replacement video is applicable to the following brands:
GE, Kenmore
Tools needed: 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, remove the mounting screws and carefully pull out the old bake element.
4
Disconnect the two wires and remove the old element.
5
Be aware that if you are unable to easily reach the wires you may need to remove the back panel to access them.
6
Install the new bake element by connecting the wires inserting the element into the oven cavity and securing the mounting screws.
7
Replace the back panel if necessary.
8
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Bake Element
$84.57
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com