Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Top Load Washer Tub to Pump Hose 137364500
Frigidaire Affinity Top Load Washer Tub to Pump Hose 137364500
Skill Level
Total Parts Cost
$37.88Estimated Savings
$112.5002:12
- Description
This video provides step-by-step repair instructions for replacing the tub to pump hose on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the pump hose are when the washer is leaking, not circulating water properly, or not draining.
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver, pliers
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver, pliers
Step By Step Instructions
1
Before you replace the tub-to-pump hose in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, release the retaining clamp securing the tub-to-pump hose to the “tee” hose and pull the hose off – be prepared for some water to spill.
5
Now release the clamp securing the tub-to-pump hose to the outer tub and pull the old hose free.
6
Prepare the new tub-to-pump hose for installation by transferring the retaining clamps from the old hose to the new one.
7
Now attach the new hose to both the outer tub and the “tee” hose then secure the new hose with the clamps.
8
Replace the front panel by inserting the panel tabs into the slots in the side panels.
9
Push the panel up into position and replace the mounting screws.
10
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the tub to pump hose on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the pump hose are when the washer is leaking, not circulating water properly, or not draining.
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver, pliers
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the tub-to-pump hose in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, release the retaining clamp securing the tub-to-pump hose to the “tee” hose and pull the hose off – be prepared for some water to spill.
5
Now release the clamp securing the tub-to-pump hose to the outer tub and pull the old hose free.
6
Prepare the new tub-to-pump hose for installation by transferring the retaining clamps from the old hose to the new one.
7
Now attach the new hose to both the outer tub and the “tee” hose then secure the new hose with the clamps.
8
Replace the front panel by inserting the panel tabs into the slots in the side panels.
9
Push the panel up into position and replace the mounting screws.
10
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com