Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Chainsaw Muffler Replacement #545128902
Craftsman Chainsaw Muffler Replacement #545128902
Skill Level
Total Parts Cost
$15.48Estimated Savings
$112.5001:31
- Description
This video provides step-by-step repair instructions for replacing the muffler on a Craftsman chainsaw. The most common reason for replacing the muffler is when the chainsaw engine is unusually loud.
All of the information for this muffler replacement video is applicable to the following brands:
Craftsman
Tools needed: T-30 Torx bit screwdriver
All of the information for this muffler replacement video is applicable to the following brands:
Craftsman
Tools needed: T-30 Torx bit screwdriver
Step By Step Instructions
1
Before you replace the muffler on your chainsaw first make sure the engine and muffler have cooled. and that the on-off switch is in the “off” position.
2
Now use a t-30 torx bit screwdriver to unthread the mounting screws securing the muffler.
3
With the screws removed, pull out the old muffler, gasket and heat shield.
4
You’re now ready to install the new muffler assembly.
5
Confirm that the gasket, heat shield and mounting screws are intact then position the assembly on the cylinder.
6
Thread and tighten the screws to secure.
7
With the repair completed turn the on-off switch to the “on” position and your chainsaw should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the muffler on a Craftsman chainsaw. The most common reason for replacing the muffler is when the chainsaw engine is unusually loud.
All of the information for this muffler replacement video is applicable to the following brands:
Craftsman
Tools needed: T-30 Torx bit screwdriver
All of the information for this muffler replacement video is applicable to the following brands:
Craftsman
Tools needed: T-30 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the muffler on your chainsaw first make sure the engine and muffler have cooled. and that the on-off switch is in the “off” position.
2
Now use a t-30 torx bit screwdriver to unthread the mounting screws securing the muffler.
3
With the screws removed, pull out the old muffler, gasket and heat shield.
4
You’re now ready to install the new muffler assembly.
5
Confirm that the gasket, heat shield and mounting screws are intact then position the assembly on the cylinder.
6
Thread and tighten the screws to secure.
7
With the repair completed turn the on-off switch to the “on” position and your chainsaw should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com