Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Top Load Washer Lid Bumper #9724509
Whirlpool/Kenmore Top Load Washer Lid Bumper #9724509
Skill Level
Total Parts Cost
$8.59Estimated Savings
$112.5000:34
- Description
This video provides step-by-step instructions for replacing the lid bumper on top loading direct drive Whirlpool washing machines. The most common reason for replacing the lid bumper is when the lid of the washer hits and grates against the frame of the washer body.
All the information in this lid bumper replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: pliers
All the information in this lid bumper replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: pliers
Step By Step Instructions
1
Lift up the lid of your washer to access the lid bumper.
2
If the old bumper is still intact, remove it by squeezing the plastic retaining clip with needle-nose pliers while pulling the bumper itself.
3
Install the new lid bumper by gently pushing it through the hole until the plastic retaining clip locks into position.
Description
This video provides step-by-step instructions for replacing the lid bumper on top loading direct drive Whirlpool washing machines. The most common reason for replacing the lid bumper is when the lid of the washer hits and grates against the frame of the washer body.
All the information in this lid bumper replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: pliers
All the information in this lid bumper replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: pliers
Step-By-Step Instructions
1
Lift up the lid of your washer to access the lid bumper.
2
If the old bumper is still intact, remove it by squeezing the plastic retaining clip with needle-nose pliers while pulling the bumper itself.
3
Install the new lid bumper by gently pushing it through the hole until the plastic retaining clip locks into position.
Applicable Product Model
Related Articles & Videos
04:10
Part Replacement
Washer Won't Spin? Replace Whirlpool Direct Drive Clutch Assembly Part # 285785
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com