Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Chainsaw Clutch Cover Replacement #577234602
Craftsman Chainsaw Clutch Cover Replacement #577234602
Skill Level
Total Parts Cost
$77.99Estimated Savings
$112.5002:27
- Description
This video provides step-by-step instructions for replacing the clutch over on Craftsman chainsaws. The most common reason for replacing the clutch cover is if it is missing or damaged; the clutch cover is a safety feature.
All of the information for this clutch cover replacement video is applicable to the following brands: Craftsman
Tools used: 13mm socket
All of the information for this clutch cover replacement video is applicable to the following brands: Craftsman
Tools used: 13mm socket
Step By Step Instructions
1
Before you replace the clutch cover on your chainsaw first make sure the engine has cooled and that the on-off switch is in the “off” position.
2
Now use the provided wrench or a 13mm socket to help loosen and unthread the nuts securing the clutch cover.
3
Confirm that the chain brake is disengaged and pull off the old cover.
4
Prepare the new clutch cover for installation by transferring the wear protector from the old cover to the new one.
5
To properly align the new cover, the tensioner pin will need to be inserted into the hole in the chain bar.
6
You will probably need to rotate the tension adjustment screw counter-clockwise to properly align the tensioner pin.
7
With the cover in place, hand-tighten the nuts.
8
Now lift the bar and rotate the adjustment screw clockwise until there is no slack in the chain.
9
Now fully tighten the nuts and confirm that the chain is taut.
10
With the repair completed turn the on-off switch to the “on” position and your chainsaw should be ready for use.
Description
This video provides step-by-step instructions for replacing the clutch over on Craftsman chainsaws. The most common reason for replacing the clutch cover is if it is missing or damaged; the clutch cover is a safety feature.
All of the information for this clutch cover replacement video is applicable to the following brands: Craftsman
Tools used: 13mm socket
All of the information for this clutch cover replacement video is applicable to the following brands: Craftsman
Tools used: 13mm socket
Step-By-Step Instructions
1
Before you replace the clutch cover on your chainsaw first make sure the engine has cooled and that the on-off switch is in the “off” position.
2
Now use the provided wrench or a 13mm socket to help loosen and unthread the nuts securing the clutch cover.
3
Confirm that the chain brake is disengaged and pull off the old cover.
4
Prepare the new clutch cover for installation by transferring the wear protector from the old cover to the new one.
5
To properly align the new cover, the tensioner pin will need to be inserted into the hole in the chain bar.
6
You will probably need to rotate the tension adjustment screw counter-clockwise to properly align the tensioner pin.
7
With the cover in place, hand-tighten the nuts.
8
Now lift the bar and rotate the adjustment screw clockwise until there is no slack in the chain.
9
Now fully tighten the nuts and confirm that the chain is taut.
10
With the repair completed turn the on-off switch to the “on” position and your chainsaw should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com