Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Lawn Mower Control Cable Replacement #946-04661A
Craftsman Lawn Mower Control Cable Replacement #946-04661A
Skill Level
Total Parts Cost
$15.44Estimated Savings
$112.5002:01
- Description
This video provides step-by-step instructions for replacing the control cable on Craftsman lawn mowers. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed.
All the information in this control cable replacement video is applicable to the following brands: MTD, Craftsman
Tools used: pliers
All the information in this control cable replacement video is applicable to the following brands: MTD, Craftsman
Tools used: pliers
Step By Step Instructions
1
Before you replace the control cable on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now disconnect the upper z-end of the old control cable from the bail arm.
4
Next, cut the zip ties securing the cable to the handle assembly.
5
Use pliers to squeeze the tabs to release the cable from the stop lever and disconnect the lower z-end from the motor bracket.
6
Rotate the cable support ninety degrees to fully release the old cable.
7
Install the new control cable by inserting the cable support into the hole in the handle assembly at a ninety degree angle then rotate.
8
Attach the lower z-end of the cable to the motor bracket and snap the cable into place on the stop lever.
9
Insert the upper z-end into the bail arm.
10
Use zip ties to secure the new cable to the handle.
11
With the repair completed reattach the wire and boot to the spark plug and your lawn mower should be ready for use.
Description
This video provides step-by-step instructions for replacing the control cable on Craftsman lawn mowers. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed.
All the information in this control cable replacement video is applicable to the following brands: MTD, Craftsman
Tools used: pliers
All the information in this control cable replacement video is applicable to the following brands: MTD, Craftsman
Tools used: pliers
Step-By-Step Instructions
1
Before you replace the control cable on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now disconnect the upper z-end of the old control cable from the bail arm.
4
Next, cut the zip ties securing the cable to the handle assembly.
5
Use pliers to squeeze the tabs to release the cable from the stop lever and disconnect the lower z-end from the motor bracket.
6
Rotate the cable support ninety degrees to fully release the old cable.
7
Install the new control cable by inserting the cable support into the hole in the handle assembly at a ninety degree angle then rotate.
8
Attach the lower z-end of the cable to the motor bracket and snap the cable into place on the stop lever.
9
Insert the upper z-end into the bail arm.
10
Use zip ties to secure the new cable to the handle.
11
With the repair completed reattach the wire and boot to the spark plug and your lawn mower should be ready for use.
Applicable Product Model
Parts Needed
Control Cable
$15.44
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com