Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Replace Ignition Switch #532193350
Craftsman Riding Lawn Mower Replace Ignition Switch #532193350
Skill Level
Total Parts Cost
$35.99Estimated Savings
$150.0001:03
- Description
This video provides step-by-step repair instructions for replacing the ignition switch on a Craftsman riding lawn mower. The most common reason for replacing the ignition switch is when the lawn mower won’t start when the key is turned in the ignition.
All of the information for this ignition switch replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: none
All of the information for this ignition switch replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: none
Step By Step Instructions
1
Before you replace the ignition switch on your riding mower make sure the switch is in the “off” position and the key has been removed.
2
Now lift up the hood reach into the steering housing and depress the tabs to release the old switch from the housing.
3
Disconnect the wire connecter.
4
Install the new ignition switch by first connecting the wire connecter.
5
Align the switch on the steering housing and snap it into place.
6
With the repair completed lower the hood and your riding mower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ignition switch on a Craftsman riding lawn mower. The most common reason for replacing the ignition switch is when the lawn mower won’t start when the key is turned in the ignition.
All of the information for this ignition switch replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: none
All of the information for this ignition switch replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: none
Step-By-Step Instructions
1
Before you replace the ignition switch on your riding mower make sure the switch is in the “off” position and the key has been removed.
2
Now lift up the hood reach into the steering housing and depress the tabs to release the old switch from the housing.
3
Disconnect the wire connecter.
4
Install the new ignition switch by first connecting the wire connecter.
5
Align the switch on the steering housing and snap it into place.
6
With the repair completed lower the hood and your riding mower should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Ignition Key
$9.98
Fuel Tank
$31.52
Fuel Tank
$54.38
Fuel Tank
$31.52
Fuel Tank
$54.38
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com