Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Headlights/Wire Harness #532400252
Craftsman Riding Lawn Mower Headlights/Wire Harness #532400252
Skill Level
Total Parts Cost
$30.44Estimated Savings
$112.5001:30
- Description
This video provides step-by-step repair instructions for replacing the headlights, sockets, and wire harness on a Craftsman riding lawn mower. The most common reason for replacing the headlight assembly and wire harness is when the lawn mower headlights aren’t working and the light switch isn’t defective.
All of the information for this headlight assembly and wire harness replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: none
All of the information for this headlight assembly and wire harness replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: none
Step By Step Instructions
1
Before you replace the headlight socket and wire assembly in your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now lift up the hood and disconnect the headlight assembly wire harness.
3
Next, remove the wires from the retainers.
4
Rotate both headlight bulb sockets clockwise to detach and remove the old assembly.
5
You’re now ready to install the new headlight socket & wire assembly.
6
Keeping the wire harness connector on the right side, align the sockets in the headlight housing and rotate counter-clockwise to lock them into place.
7
Secure the wires under the retainers and connect the wire harness.
8
With the repair completed lower the hood.
Description
This video provides step-by-step repair instructions for replacing the headlights, sockets, and wire harness on a Craftsman riding lawn mower. The most common reason for replacing the headlight assembly and wire harness is when the lawn mower headlights aren’t working and the light switch isn’t defective.
All of the information for this headlight assembly and wire harness replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: none
All of the information for this headlight assembly and wire harness replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: none
Step-By-Step Instructions
1
Before you replace the headlight socket and wire assembly in your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now lift up the hood and disconnect the headlight assembly wire harness.
3
Next, remove the wires from the retainers.
4
Rotate both headlight bulb sockets clockwise to detach and remove the old assembly.
5
You’re now ready to install the new headlight socket & wire assembly.
6
Keeping the wire harness connector on the right side, align the sockets in the headlight housing and rotate counter-clockwise to lock them into place.
7
Secure the wires under the retainers and connect the wire harness.
8
With the repair completed lower the hood.
Applicable Product Model
Parts Needed
Light Assembly
$30.44
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com