Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Replace Reverse Module #532191834
Craftsman Riding Lawn Mower Replace Reverse Module #532191834
Skill Level
Total Parts Cost
$34.26Estimated Savings
$112.5001:25
- Description
This video provides step-by-step instructions for replacing the interlock switch (reverse module) on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the reverse module is when it does not disengage the mower blades while in reverse.
All of the information in this interlock switch replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket
All of the information in this interlock switch replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket
Step By Step Instructions
1
Before you replace the reverse module on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now shift the transmission lever forward and use a 3/8th inch socket to help loosen and remove the mounting screws securing the reverse module.
3
Disconnect the wire harness to fully remove the old part.
4
Install the new reverse module by first connecting the wire harness.
5
Align the module on the shift console then thread and tighten the mounting screws to secure.
6
With the module in place, return the transmission lever to the neutral position.
Description
This video provides step-by-step instructions for replacing the interlock switch (reverse module) on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the reverse module is when it does not disengage the mower blades while in reverse.
All of the information in this interlock switch replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket
All of the information in this interlock switch replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket
Step-By-Step Instructions
1
Before you replace the reverse module on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now shift the transmission lever forward and use a 3/8th inch socket to help loosen and remove the mounting screws securing the reverse module.
3
Disconnect the wire harness to fully remove the old part.
4
Install the new reverse module by first connecting the wire harness.
5
Align the module on the shift console then thread and tighten the mounting screws to secure.
6
With the module in place, return the transmission lever to the neutral position.
Applicable Product Model
Parts Needed
Interlock Switch
$34.26
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com