Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Replace Brake Spring #532197296
Craftsman Riding Lawn Mower Replace Brake Spring #532197296
Skill Level
Total Parts Cost
$7.12Estimated Savings
$112.5002:36
- Description
This video provides step-by-step instructions for replacing the brake spring on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the brake spring is if it breaks or wears out, causing the brakes to not engage.
All of the information in this brake spring replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: floor jack, large flat-head screwdriver, needle-nose pliers
All of the information in this brake spring replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: floor jack, large flat-head screwdriver, needle-nose pliers
Step By Step Instructions
1
Before you replace the brake spring on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now confirm that the brake is disengaged.
3
We recommend removing the left rear wheel to make accessing the spring easier.
4
To do this, use a floor jack to lift up the rear of the mower.
5
Next, remove the dust cap from the wheel.
6
Use a large flathead screwdriver to help pry the e-clip off.
7
Remove the outer washers and pull off the wheel.
8
Now use needle-nose pliers to remove the cotter pin securing the brake spring.
9
Remove the washer and detach the old spring if still intact.
10
Install the new brake spring by hooking the long end onto the brake lever and the opposite end onto the brake rod.
11
Now slide on the washer and secure the assembly with the cotter pin.
12
Confirm that the spacers and key are in place on the axle then slide on the wheel.
13
Replace the outer washers secure the e-clip and replace the dust cap.
14
With the repair completed lower the rear of the mower.
Description
This video provides step-by-step instructions for replacing the brake spring on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the brake spring is if it breaks or wears out, causing the brakes to not engage.
All of the information in this brake spring replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: floor jack, large flat-head screwdriver, needle-nose pliers
All of the information in this brake spring replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: floor jack, large flat-head screwdriver, needle-nose pliers
Step-By-Step Instructions
1
Before you replace the brake spring on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now confirm that the brake is disengaged.
3
We recommend removing the left rear wheel to make accessing the spring easier.
4
To do this, use a floor jack to lift up the rear of the mower.
5
Next, remove the dust cap from the wheel.
6
Use a large flathead screwdriver to help pry the e-clip off.
7
Remove the outer washers and pull off the wheel.
8
Now use needle-nose pliers to remove the cotter pin securing the brake spring.
9
Remove the washer and detach the old spring if still intact.
10
Install the new brake spring by hooking the long end onto the brake lever and the opposite end onto the brake rod.
11
Now slide on the washer and secure the assembly with the cotter pin.
12
Confirm that the spacers and key are in place on the axle then slide on the wheel.
13
Replace the outer washers secure the e-clip and replace the dust cap.
14
With the repair completed lower the rear of the mower.
Applicable Product Model
Parts Needed
Spring
$7.12
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com