Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Large Deck Pulley #532196106
Craftsman Riding Lawn Mower Large Deck Pulley #532196106
Skill Level
Total Parts Cost
$59.99Estimated Savings
$112.5003:20
- Description
This video provides step-by-step instructions for replacing the large flat idler pulley (deck pulley) on Craftsman, Husqvarna, and Poulan riding lawn mowers. The most common reason for replacing the pulley is if it breaks, causing the blades not to cut.
All of the information in this pulley replacement video is applicable to the following brands: Craftsman, Husqvarna, Poulan
Tools used: 9/16” socket
All of the information in this pulley replacement video is applicable to the following brands: Craftsman, Husqvarna, Poulan
Tools used: 9/16” socket
Step By Step Instructions
1
Before you replace the large deck pulley on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Confirm that the mower deck is at its lowest position and that the clutch actuator lever is in the “off” position.
3
Now remove the retaining pins securing the support arms and detach the arms to release the mower deck from the frame.
4
Next, release the deck belt from the engine pulley and the belt guides.
5
Detach the clutch cable from the retainer.
6
You can now slide the deck out from under the frame.
7
Move the support arm and belt out of the way then use a 9/16th inch socket to loosen and unthread the mounting nut securing the deck pulley – be aware you will need to support the bolt from the bottom to keep it from rotating when removing the nut.
8
With the nut unthreaded, remove the old pulley.
9
Before you install the new large deck pulley first confirm that the mounting bolt and belt guide are in position.
10
Slide the new pulley onto the bolt then thread and tighten the nut to secure.
11
Align the belt on the new pulley then slide the mower deck back under the frame.
12
Secure the clutch cable in the retainer.
13
Align the new belt on the engine pulley and the belt guides.
14
Reposition the support arms and secure them using the washers where applicable and the retaining pins.
Description
This video provides step-by-step instructions for replacing the large flat idler pulley (deck pulley) on Craftsman, Husqvarna, and Poulan riding lawn mowers. The most common reason for replacing the pulley is if it breaks, causing the blades not to cut.
All of the information in this pulley replacement video is applicable to the following brands: Craftsman, Husqvarna, Poulan
Tools used: 9/16” socket
All of the information in this pulley replacement video is applicable to the following brands: Craftsman, Husqvarna, Poulan
Tools used: 9/16” socket
Step-By-Step Instructions
1
Before you replace the large deck pulley on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Confirm that the mower deck is at its lowest position and that the clutch actuator lever is in the “off” position.
3
Now remove the retaining pins securing the support arms and detach the arms to release the mower deck from the frame.
4
Next, release the deck belt from the engine pulley and the belt guides.
5
Detach the clutch cable from the retainer.
6
You can now slide the deck out from under the frame.
7
Move the support arm and belt out of the way then use a 9/16th inch socket to loosen and unthread the mounting nut securing the deck pulley – be aware you will need to support the bolt from the bottom to keep it from rotating when removing the nut.
8
With the nut unthreaded, remove the old pulley.
9
Before you install the new large deck pulley first confirm that the mounting bolt and belt guide are in position.
10
Slide the new pulley onto the bolt then thread and tighten the nut to secure.
11
Align the belt on the new pulley then slide the mower deck back under the frame.
12
Secure the clutch cable in the retainer.
13
Align the new belt on the engine pulley and the belt guides.
14
Reposition the support arms and secure them using the washers where applicable and the retaining pins.
Applicable Product Model
Parts Needed
Idler Pulley
$59.99
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com