Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Deck Wheel Replacement #532188606
Craftsman Riding Lawn Mower Deck Wheel Replacement #532188606
Skill Level
Total Parts Cost
$11.74Estimated Savings
$112.5001:03
- Description
This video provides step-by-step instructions for replacing a deck wheel on Craftsman riding lawn mowers. The most common reason for replacing a deck wheel is if it is damaged, which can cause either an uneven cut or damage to the lawn.
All of the information in this deck wheel replacement video is applicable to the following brands: Craftsman, Ariens, Husqvarna, Poulan, Dixon
Tools used: 3/4” socket, 9/16” wrench
All of the information in this deck wheel replacement video is applicable to the following brands: Craftsman, Ariens, Husqvarna, Poulan, Dixon
Tools used: 3/4” socket, 9/16” wrench
Step By Step Instructions
1
Before you replace deck wheel on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Note the location of the mounting bolt and nut for the deck wheel you’re replacing then use a three-quarter inch socket and a 9/16th inch wrench to loosen and unthread the nut.
3
With the nut unthreaded, remove the old wheel.
4
Prepare the new deck wheel for installation by inserting the bolt and sliding on the washer.
5
Now insert the bolt into the appropriate hole in the mounting bracket.
6
Thread the nut and tighten to secure.
Description
This video provides step-by-step instructions for replacing a deck wheel on Craftsman riding lawn mowers. The most common reason for replacing a deck wheel is if it is damaged, which can cause either an uneven cut or damage to the lawn.
All of the information in this deck wheel replacement video is applicable to the following brands: Craftsman, Ariens, Husqvarna, Poulan, Dixon
Tools used: 3/4” socket, 9/16” wrench
All of the information in this deck wheel replacement video is applicable to the following brands: Craftsman, Ariens, Husqvarna, Poulan, Dixon
Tools used: 3/4” socket, 9/16” wrench
Step-By-Step Instructions
1
Before you replace deck wheel on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Note the location of the mounting bolt and nut for the deck wheel you’re replacing then use a three-quarter inch socket and a 9/16th inch wrench to loosen and unthread the nut.
3
With the nut unthreaded, remove the old wheel.
4
Prepare the new deck wheel for installation by inserting the bolt and sliding on the washer.
5
Now insert the bolt into the appropriate hole in the mounting bracket.
6
Thread the nut and tighten to secure.
Applicable Product Model
Parts Needed
Deck Wheel
$11.74
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com