Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Brake Return Spring #584281901
Craftsman Riding Lawn Mower Brake Return Spring #584281901
Skill Level
Total Parts Cost
$18.79Estimated Savings
$112.5002:15
- Description
This video provides step-by-step instructions for replacing a brake return spring on Craftsman riding lawn mowers. The most common reason for replacing a brake return spring is when it is broken or worn out, which can cause the brakes to not disengage when the user stops pressing the brake pedal.
All of the information in this brake return spring replacement video is applicable to the following brands: Craftsman
Tools used: floor jack, large flat-head screwdriver, flat-head screwdriver
All of the information in this brake return spring replacement video is applicable to the following brands: Craftsman
Tools used: floor jack, large flat-head screwdriver, flat-head screwdriver
Step By Step Instructions
1
Before you replace the brake return spring on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now confirm that the brake is disengaged.
3
We recommend removing the left rear wheel to make accessing the spring easier.
4
To do this, use a floor jack to lift up the rear of the mower.
5
Next, remove the dust cap from the wheel.
6
Use a large flathead screwdriver to help pry the e-clip off.
7
Remove the outer washers and pull off the wheel.
8
Use needle-nose pliers to help unhook the old brake return spring from the mounting bolt, if still intact, and remove.
9
Install the new brake return spring by hooking the small end onto the brake lever then hook the opposite end onto the mounting bolt.
10
Confirm that the spacers and key are in place on the axle then slide on the wheel.
11
Replace the outer washers secure the e-clip and replace the dust cap.
12
With the repair completed lower the rear of the mower.
Description
This video provides step-by-step instructions for replacing a brake return spring on Craftsman riding lawn mowers. The most common reason for replacing a brake return spring is when it is broken or worn out, which can cause the brakes to not disengage when the user stops pressing the brake pedal.
All of the information in this brake return spring replacement video is applicable to the following brands: Craftsman
Tools used: floor jack, large flat-head screwdriver, flat-head screwdriver
All of the information in this brake return spring replacement video is applicable to the following brands: Craftsman
Tools used: floor jack, large flat-head screwdriver, flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the brake return spring on your riding mower make sure the ignition switch is in the “off” position and the key has been removed.
2
Now confirm that the brake is disengaged.
3
We recommend removing the left rear wheel to make accessing the spring easier.
4
To do this, use a floor jack to lift up the rear of the mower.
5
Next, remove the dust cap from the wheel.
6
Use a large flathead screwdriver to help pry the e-clip off.
7
Remove the outer washers and pull off the wheel.
8
Use needle-nose pliers to help unhook the old brake return spring from the mounting bolt, if still intact, and remove.
9
Install the new brake return spring by hooking the small end onto the brake lever then hook the opposite end onto the mounting bolt.
10
Confirm that the spacers and key are in place on the axle then slide on the wheel.
11
Replace the outer washers secure the e-clip and replace the dust cap.
12
With the repair completed lower the rear of the mower.
Applicable Product Model
Parts Needed
Spring
$18.79
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com