Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower Clutch Lever #532199972
Craftsman Riding Lawn Mower Clutch Lever #532199972
Skill Level
Total Parts Cost
$62.99Estimated Savings
$112.5003:32
- Description
This video provides step-by-step instructions for replacing the clutch lever on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the clutch lever is when pressing the lever does not cause the blades to begin rotating.
All of the information in this clutch lever replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket, 1/4” socket, pliers
All of the information in this clutch lever replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket, 1/4” socket, pliers
Step By Step Instructions
1
Before you replace the clutch actuator assembly in your riding mower make sure the engine has cooled the ignition switch is in the “off” position and the key has been removed.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now lift up the hood and use a 3/8th inch socket to help unthread the fuel tank mounting bolts.
4
With the bolts removed, set the tank aside.
5
Next, use a quarter-inch socket to unthread the screws securing the clutch actuator assembly.
6
Pull the handle off so you can release the actuator assembly from the steering housing.
7
Depress the retaining tabs to release the clutch interlock switch from the assembly.
8
Use pliers to squeeze the tabs to release the wire retainer.
9
Next, detach the spring from the pin and remove the washer and cable then use pliers to squeeze the tabs to release the cable retainer from the assembly.
10
You’re now ready to install the new clutch actuator assembly.
11
Detach the spring position the cable on the pin slide on the washer then replace the spring to secure.
12
Snap the cable retainer into place on the assembly frame.
13
Position the clutch interlock switch on the frame and secure the wire retainer.
14
Now insert the clutch actuator lever through the slot in the steering housing.
15
Position the actuator assembly and replace the mounting bolts to secure.
16
Slide the handle on the lever.
17
Reposition the fuel tank and secure it with the mounting bolts.
18
With the repair completed lower the hood and your riding mower should be ready for use.
Description
This video provides step-by-step instructions for replacing the clutch lever on Craftsman and Husqvarna riding lawn mowers. The most common reason for replacing the clutch lever is when pressing the lever does not cause the blades to begin rotating.
All of the information in this clutch lever replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket, 1/4” socket, pliers
All of the information in this clutch lever replacement video is applicable to the following brands: Craftsman, Husqvarna
Tools used: 3/8” socket, 1/4” socket, pliers
Step-By-Step Instructions
1
Before you replace the clutch actuator assembly in your riding mower make sure the engine has cooled the ignition switch is in the “off” position and the key has been removed.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now lift up the hood and use a 3/8th inch socket to help unthread the fuel tank mounting bolts.
4
With the bolts removed, set the tank aside.
5
Next, use a quarter-inch socket to unthread the screws securing the clutch actuator assembly.
6
Pull the handle off so you can release the actuator assembly from the steering housing.
7
Depress the retaining tabs to release the clutch interlock switch from the assembly.
8
Use pliers to squeeze the tabs to release the wire retainer.
9
Next, detach the spring from the pin and remove the washer and cable then use pliers to squeeze the tabs to release the cable retainer from the assembly.
10
You’re now ready to install the new clutch actuator assembly.
11
Detach the spring position the cable on the pin slide on the washer then replace the spring to secure.
12
Snap the cable retainer into place on the assembly frame.
13
Position the clutch interlock switch on the frame and secure the wire retainer.
14
Now insert the clutch actuator lever through the slot in the steering housing.
15
Position the actuator assembly and replace the mounting bolts to secure.
16
Slide the handle on the lever.
17
Reposition the fuel tank and secure it with the mounting bolts.
18
With the repair completed lower the hood and your riding mower should be ready for use.
Applicable Product Model
Parts Needed
Clutch Lever
$62.99
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com