Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Lawn Mower Not Running Smoothly? #691035
Briggs & Stratton Lawn Mower Not Running Smoothly? #691035
Skill Level
Total Parts Cost
$9.39Estimated Savings
$112.5001:42
- Description
This video provides step-by-step instructions for replacing the fuel filter on Briggs and Stratton small engines, commonly found in John Deere, Toro, and Craftsman riding lawn mowers. The most common reason for replacing the fuel filter is if it is damaged or clogged, causing the lawn mower to not run smoothly or not start.
All of the information in this fuel filter replacement video is applicable to the following brands: Briggs & Stratton, John Deere, Toro, Craftsman
Tools used: none
All of the information in this fuel filter replacement video is applicable to the following brands: Briggs & Stratton, John Deere, Toro, Craftsman
Tools used: none
Step By Step Instructions
1
In this video, we will show one or more of these icons to alert you when to use caution before you replace the fuel filter on your engine.
2
Make sure the engine has cooled, the ignition switch is in the off position, and the key has been removed if applicable.
3
Lift up the hood or remove the engine cover.
4
Use locking pliers to crimp the fuel line connected from the tank to the fuel filter.
5
Release the retaining clamps securing the fuel lines to the filter, then pull the old filter free of the lines.
6
Be prepared for some fuel to spill.
7
You're now ready to install the new fuel filter.
8
With the embossed arrow facing towards the carburetor, connect the fuel lines to the new filter.
9
Secure them with the retaining clamps and remove the locking pliers.
10
With the repair completed, lower the hood or replace the engine cover.
Description
This video provides step-by-step instructions for replacing the fuel filter on Briggs and Stratton small engines, commonly found in John Deere, Toro, and Craftsman riding lawn mowers. The most common reason for replacing the fuel filter is if it is damaged or clogged, causing the lawn mower to not run smoothly or not start.
All of the information in this fuel filter replacement video is applicable to the following brands: Briggs & Stratton, John Deere, Toro, Craftsman
Tools used: none
All of the information in this fuel filter replacement video is applicable to the following brands: Briggs & Stratton, John Deere, Toro, Craftsman
Tools used: none
Step-By-Step Instructions
1
In this video, we will show one or more of these icons to alert you when to use caution before you replace the fuel filter on your engine.
2
Make sure the engine has cooled, the ignition switch is in the off position, and the key has been removed if applicable.
3
Lift up the hood or remove the engine cover.
4
Use locking pliers to crimp the fuel line connected from the tank to the fuel filter.
5
Release the retaining clamps securing the fuel lines to the filter, then pull the old filter free of the lines.
6
Be prepared for some fuel to spill.
7
You're now ready to install the new fuel filter.
8
With the embossed arrow facing towards the carburetor, connect the fuel lines to the new filter.
9
Secure them with the retaining clamps and remove the locking pliers.
10
With the repair completed, lower the hood or replace the engine cover.
Applicable Product Model
Related Articles & Videos
05:19
Part Replacement
Briggs & Stratton Mower Battery Keeps Dying? Engine Alternator 592831
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com