Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Riding Lawn Mower 20 Amp Fuse Replacement #532175158
Craftsman Riding Lawn Mower 20 Amp Fuse Replacement #532175158
Skill Level
Total Parts Cost
$5.97Estimated Savings
$112.5001:51
- Description
This video provides step-by-step repair instructions for replacing the fuse on a Craftsman riding lawn mower. The most common reason for replacing the fuse is when the fuse is blown.
All of the information for this lawn mower fuse replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: Two 7/16th inch wrenches, wire cutters
All of the information for this lawn mower fuse replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: Two 7/16th inch wrenches, wire cutters
Step By Step Instructions
1
Before you replace the fuse in your riding mower Make sure the ignition switch is in the “off” position and the key has been removed.
2
To avoid creating a shock risk, we recommend disconnecting the negative cable from the battery.
3
To do this, lift up the seat and use two 7/16th inch wrenches to unthread the nut to release the black cable from the battery.
4
Now cut the zip tie holding the old fuse in place and detach the fuse.
5
Install the new fuse by inserting it into the fuse block.
6
We recommend using a new zip tie to secure it.
7
With the new fuse installed, reconnect the black cable to the negative terminal on the battery secure it with the nut. then lower the seat.
Description
This video provides step-by-step repair instructions for replacing the fuse on a Craftsman riding lawn mower. The most common reason for replacing the fuse is when the fuse is blown.
All of the information for this lawn mower fuse replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: Two 7/16th inch wrenches, wire cutters
All of the information for this lawn mower fuse replacement video is applicable to the following brands:
Craftsman, Husqvarna
Tools needed: Two 7/16th inch wrenches, wire cutters
Step-By-Step Instructions
1
Before you replace the fuse in your riding mower Make sure the ignition switch is in the “off” position and the key has been removed.
2
To avoid creating a shock risk, we recommend disconnecting the negative cable from the battery.
3
To do this, lift up the seat and use two 7/16th inch wrenches to unthread the nut to release the black cable from the battery.
4
Now cut the zip tie holding the old fuse in place and detach the fuse.
5
Install the new fuse by inserting it into the fuse block.
6
We recommend using a new zip tie to secure it.
7
With the new fuse installed, reconnect the black cable to the negative terminal on the battery secure it with the nut. then lower the seat.
Applicable Product Model
Parts Needed
Fuse
$5.97
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com