Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Freezer Drawer Support, Right W10330991
Whirlpool Refrigerator Freezer Drawer Support, Right W10330991
Skill Level
Total Parts Cost
$77.22Estimated Savings
$112.5003:18
- Description
This video provides step-by-step instructions for replacing the freezer right drawer support on Whirlpool refrigerators. The most common reason for replacing a drawer support is if is damaged, causing the drawer to not open smoothly.
All of the information in this drawer support replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley, Dacor, Gaggenau
Tools used: large flat-head screwdriver, grip pliers, power drill, 3/16” drill bit, 1/4” socket or nut driver
All of the information in this drawer support replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley, Dacor, Gaggenau
Tools used: large flat-head screwdriver, grip pliers, power drill, 3/16” drill bit, 1/4” socket or nut driver
Step By Step Instructions
1
Before you replace the right side freezer drawer support in your refrigerator unplug the power cord.
2
Now open the freezer drawer and lift out the bin.
3
Use a large flat-head screwdriver to depress the retaining tabs securing both drawer rail assemblies then pull the entire drawer assembly out.
4
Set the assembly on a blanked with the slides facing upward.
5
Detach the support rod from the gears.
6
Lift up the right drawer slide and use vice-grip pliers to secure it.
7
Now use a 1/8th inch drill bit to drill out the rivet securing the drawer slide.
8
Remove the pliers then rotate the slide to remove it from the support.
9
Now use a quarter-inch socket or nut driver to remove the mounting screws securing the support.
10
Set the old support aside.
11
Install the new freezer drawer support by aligning it on the drawer liner then replace the screws to secure it.
12
Now position the slide on the support.
13
Lift up the slide and support it with the pliers then using a rivet gun, secure the slide with a 1/8th inch rivet.
14
Remove the pliers then reinsert the support rod.
15
Align the slides on the rails in the freezer and push the drawer forward.
16
Now snap both slides into place to secure the drawer assembly and replace the bin.
17
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Description
This video provides step-by-step instructions for replacing the freezer right drawer support on Whirlpool refrigerators. The most common reason for replacing a drawer support is if is damaged, causing the drawer to not open smoothly.
All of the information in this drawer support replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley, Dacor, Gaggenau
Tools used: large flat-head screwdriver, grip pliers, power drill, 3/16” drill bit, 1/4” socket or nut driver
All of the information in this drawer support replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley, Dacor, Gaggenau
Tools used: large flat-head screwdriver, grip pliers, power drill, 3/16” drill bit, 1/4” socket or nut driver
Step-By-Step Instructions
1
Before you replace the right side freezer drawer support in your refrigerator unplug the power cord.
2
Now open the freezer drawer and lift out the bin.
3
Use a large flat-head screwdriver to depress the retaining tabs securing both drawer rail assemblies then pull the entire drawer assembly out.
4
Set the assembly on a blanked with the slides facing upward.
5
Detach the support rod from the gears.
6
Lift up the right drawer slide and use vice-grip pliers to secure it.
7
Now use a 1/8th inch drill bit to drill out the rivet securing the drawer slide.
8
Remove the pliers then rotate the slide to remove it from the support.
9
Now use a quarter-inch socket or nut driver to remove the mounting screws securing the support.
10
Set the old support aside.
11
Install the new freezer drawer support by aligning it on the drawer liner then replace the screws to secure it.
12
Now position the slide on the support.
13
Lift up the slide and support it with the pliers then using a rivet gun, secure the slide with a 1/8th inch rivet.
14
Remove the pliers then reinsert the support rod.
15
Align the slides on the rails in the freezer and push the drawer forward.
16
Now snap both slides into place to secure the drawer assembly and replace the bin.
17
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Support
$77.22
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com