Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Freezer Drawer Support, Left #W10330993
Whirlpool Refrigerator Freezer Drawer Support, Left #W10330993
Skill Level
Total Parts Cost
$80.94Estimated Savings
$112.5003:21
- Description
This video provides step-by-step repair instructions for replacing the left freezer drawer support on a Whirlpool refrigerator. The most common reason for replacing the drawer support is when the drawer doesn’t open smoothly.
All of the information for this freezer drawer support replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley
Tools needed: large flat-head screwdriver, grip pliers, power drill and a 3/16th inch drill bit, quarter-inch socket or nut driver
All of the information for this freezer drawer support replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley
Tools needed: large flat-head screwdriver, grip pliers, power drill and a 3/16th inch drill bit, quarter-inch socket or nut driver
Step By Step Instructions
1
Before you replace the left side freezer drawer support in your refrigerator unplug the power cord.
2
Now open the freezer drawer and lift out the bin.
3
Use a large flat-head screwdriver to depress the retaining tabs securing both drawer rail assemblies then pull the entire drawer assembly out.
4
Set the assembly on a blanked with the slides facing upward.
5
Detach the support rod from the gears.
6
Lift up the left drawer slide and use vice-grip pliers to support it.
7
Now use a 1/8th inch drill bit to drill out the rivet securing the drawer slide.
8
Remove the pliers then rotate the slide to remove it from the support.
9
Now use a quarter-inch socket or nut driver to remove the mounting screws securing the support.
10
Set the old support aside.
11
Install the new freezer drawer support by aligning it on the drawer liner then replace the screws to secure it.
12
Now position the slide on the support.
13
Lift up the slide and support it with the pliers then using a rivet gun, secure the slide with a 1/8th inch rivet.
14
Remove the pliers then reinsert the support rod.
15
Align the slides on the rails in the freezer and push the drawer forward.
16
Now snap both slides into place to secure the drawer assembly and replace the bin.
17
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left freezer drawer support on a Whirlpool refrigerator. The most common reason for replacing the drawer support is when the drawer doesn’t open smoothly.
All of the information for this freezer drawer support replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley
Tools needed: large flat-head screwdriver, grip pliers, power drill and a 3/16th inch drill bit, quarter-inch socket or nut driver
All of the information for this freezer drawer support replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn Air, Ikea, Crosley
Tools needed: large flat-head screwdriver, grip pliers, power drill and a 3/16th inch drill bit, quarter-inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the left side freezer drawer support in your refrigerator unplug the power cord.
2
Now open the freezer drawer and lift out the bin.
3
Use a large flat-head screwdriver to depress the retaining tabs securing both drawer rail assemblies then pull the entire drawer assembly out.
4
Set the assembly on a blanked with the slides facing upward.
5
Detach the support rod from the gears.
6
Lift up the left drawer slide and use vice-grip pliers to support it.
7
Now use a 1/8th inch drill bit to drill out the rivet securing the drawer slide.
8
Remove the pliers then rotate the slide to remove it from the support.
9
Now use a quarter-inch socket or nut driver to remove the mounting screws securing the support.
10
Set the old support aside.
11
Install the new freezer drawer support by aligning it on the drawer liner then replace the screws to secure it.
12
Now position the slide on the support.
13
Lift up the slide and support it with the pliers then using a rivet gun, secure the slide with a 1/8th inch rivet.
14
Remove the pliers then reinsert the support rod.
15
Align the slides on the rails in the freezer and push the drawer forward.
16
Now snap both slides into place to secure the drawer assembly and replace the bin.
17
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Support
$80.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com