Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Freezer Rack Gear, Long Stem #W10474715
Whirlpool Refrigerator Freezer Rack Gear, Long Stem #W10474715
Skill Level
Total Parts Cost
$27.14Estimated Savings
$112.5002:11
- Description
This video provides step-by-step instructions for replacing the freezer rack long stem gear on Whirlpool refrigerators. The most common reason for replacing the long stem gear is if the freezer rack is not sliding smoothly and this gear is damaged.
All of the information in this gear replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn Air, Ikea
Tools used: 1/4” socket or nut driver, flat-head screwdriver, small flat-head screwdriver
All of the information in this gear replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn Air, Ikea
Tools used: 1/4” socket or nut driver, flat-head screwdriver, small flat-head screwdriver
Step By Step Instructions
1
Before you replace the freezer rack long-stem gear in your refrigerator unplug the power cord.
2
Now open the freezer drawer use a quarter-inch socket or nut driver to unthread the screws securing the left and right side rack support rails.
3
Now use a flat-head screwdriver to depress the retaining tabs to release the left and right gear support brackets.
4
Lift the rails up and you can remove the rack from the freezer compartment.
5
Set the rack on a sturdy surface and slide the support rod out of the short stem gear to remove it.
6
Use a small flat-head screwdriver to depress the retaining tab to detach the old gear.
7
Install the new long-stem rack gear by snapping it into place on the bracket.
8
Insert the support rod all the way into the new long-stem gear and insert the opposite end into the short-stem gear.
9
Realign the rack on the support rails.
10
Push the support rails down and snap the gear support brackets into place.
11
Rethread and tighten the screws to secure the support rails.
12
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Description
This video provides step-by-step instructions for replacing the freezer rack long stem gear on Whirlpool refrigerators. The most common reason for replacing the long stem gear is if the freezer rack is not sliding smoothly and this gear is damaged.
All of the information in this gear replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn Air, Ikea
Tools used: 1/4” socket or nut driver, flat-head screwdriver, small flat-head screwdriver
All of the information in this gear replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn Air, Ikea
Tools used: 1/4” socket or nut driver, flat-head screwdriver, small flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the freezer rack long-stem gear in your refrigerator unplug the power cord.
2
Now open the freezer drawer use a quarter-inch socket or nut driver to unthread the screws securing the left and right side rack support rails.
3
Now use a flat-head screwdriver to depress the retaining tabs to release the left and right gear support brackets.
4
Lift the rails up and you can remove the rack from the freezer compartment.
5
Set the rack on a sturdy surface and slide the support rod out of the short stem gear to remove it.
6
Use a small flat-head screwdriver to depress the retaining tab to detach the old gear.
7
Install the new long-stem rack gear by snapping it into place on the bracket.
8
Insert the support rod all the way into the new long-stem gear and insert the opposite end into the short-stem gear.
9
Realign the rack on the support rails.
10
Push the support rails down and snap the gear support brackets into place.
11
Rethread and tighten the screws to secure the support rails.
12
With the repair completed, plug the power cord back in and you refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Glide Gear
$27.14
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com