Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Dispenser Control Board #W10521642
Whirlpool Refrigerator Dispenser Control Board #W10521642
Skill Level
Total Parts Cost
$288.25Estimated Savings
$112.5001:37
- Description
This video provides step-by-step repair instructions for replacing the dispenser control board on a Whirlpool refrigerator. The most common reason for replacing the control board is when none of the buttons are working.
All of the information for this dispenser control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat-head screwdriver
All of the information for this dispenser control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat-head screwdriver
Step By Step Instructions
1
Before you replace the dispenser control in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the old dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the old control.
4
Install the new dispenser control by first connecting the wires to the appropriate terminals.
5
Now insert the tabs on top of the control into the housing slots and snap the control into position.
6
Remove the protective covering from the control panel.
7
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser control board on a Whirlpool refrigerator. The most common reason for replacing the control board is when none of the buttons are working.
All of the information for this dispenser control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat-head screwdriver
All of the information for this dispenser control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the dispenser control in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the old dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the old control.
4
Install the new dispenser control by first connecting the wires to the appropriate terminals.
5
Now insert the tabs on top of the control into the housing slots and snap the control into position.
6
Remove the protective covering from the control panel.
7
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Dispenser Control Board
$288.25
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com