Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Replace Water Dispenser Spigot #2316647
Whirlpool Refrigerator Replace Water Dispenser Spigot #2316647
Skill Level
Total Parts Cost
$68.94Estimated Savings
$112.5002:00
- Description
This video provides step-by-step instructions for replacing the water dispenser spigot on Whirlpool refrigerators. The most common reason for replacing the spigot is when it is damaged, causing the water dispenser to not work properly.
All of the information in this spigot replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench
All of the information in this spigot replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench
Step By Step Instructions
1
Before you replace the water dispenser spigot in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the control.
4
Use a 5/16th inch wrench to depress the locking ring to release the water line from the spigot – be prepared for a small amount of water to spill.
5
Release the retaining tabs and push the old spigot up to remove it.
6
Install the new spigot by aligning it on the module and snapping it into place.
7
Fully insert the water line into the new spigot.
8
Reinstall the dispenser control by first connecting the wires to the appropriate terminals.
9
Now insert the tabs on top of the control into the housing slots and snap the control into position.
10
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step instructions for replacing the water dispenser spigot on Whirlpool refrigerators. The most common reason for replacing the spigot is when it is damaged, causing the water dispenser to not work properly.
All of the information in this spigot replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench
All of the information in this spigot replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench
Step-By-Step Instructions
1
Before you replace the water dispenser spigot in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the control.
4
Use a 5/16th inch wrench to depress the locking ring to release the water line from the spigot – be prepared for a small amount of water to spill.
5
Release the retaining tabs and push the old spigot up to remove it.
6
Install the new spigot by aligning it on the module and snapping it into place.
7
Fully insert the water line into the new spigot.
8
Reinstall the dispenser control by first connecting the wires to the appropriate terminals.
9
Now insert the tabs on top of the control into the housing slots and snap the control into position.
10
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Nozzle
$68.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com