Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Replace Arm Extension Blade #W10351019
Whirlpool Refrigerator Replace Arm Extension Blade #W10351019
Skill Level
Total Parts Cost
$47.40Estimated Savings
$112.5003:01
- Description
This video provides step-by-step repair instructions for replacing the arm extension blade on a Whirlpool refrigerator. The most common reason for replacing the arm extension blade is when it is broken or cracked, causing the ice dispenser to keep making ice and overflow.
All of the information for this arm extension blade replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Maytag
Tools needed: small flat-head screwdriver
All of the information for this arm extension blade replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Maytag
Tools needed: small flat-head screwdriver
Step By Step Instructions
1
Before you replace the ice level arm extension blade in your refrigerator unplug the power cord.
2
To make it easier to access the arm, we recommend removing the ice maker assembly from the freezer compartment.
3
To do this, depress the release button and pull out the ice bin.
4
Insert a small flat-head screwdriver into the side cover access hole and press down to release the locking lever then pull the side cover forward to remove.
5
Use the screwdriver to depress the retaining tab to release the ice maker assembly.
6
Pull the assembly forward.
7
Disconnect the wire harness and remove the entire assembly.
8
Detach the ice level arm from the assembly.
9
If still intact, remove the old blade from the arm.
10
Install the new ice level arm extension blade by positioning it on the arm and snapping it into place.
11
Reattach the arm to the ice maker assembly.
12
Reinstall the ice maker assembly by sliding it part way into the housing.
13
Reconnect the wire harness and push the assembly all the way back - be aware the ice maker fill spout may make this difficult.
14
Realign the side cover and slide it into place.
15
Realign the ice bin on the track and snap it into position.
16
With the repair completed, plug the power cord back in and your ice maker should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the arm extension blade on a Whirlpool refrigerator. The most common reason for replacing the arm extension blade is when it is broken or cracked, causing the ice dispenser to keep making ice and overflow.
All of the information for this arm extension blade replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Maytag
Tools needed: small flat-head screwdriver
All of the information for this arm extension blade replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Maytag
Tools needed: small flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the ice level arm extension blade in your refrigerator unplug the power cord.
2
To make it easier to access the arm, we recommend removing the ice maker assembly from the freezer compartment.
3
To do this, depress the release button and pull out the ice bin.
4
Insert a small flat-head screwdriver into the side cover access hole and press down to release the locking lever then pull the side cover forward to remove.
5
Use the screwdriver to depress the retaining tab to release the ice maker assembly.
6
Pull the assembly forward.
7
Disconnect the wire harness and remove the entire assembly.
8
Detach the ice level arm from the assembly.
9
If still intact, remove the old blade from the arm.
10
Install the new ice level arm extension blade by positioning it on the arm and snapping it into place.
11
Reattach the arm to the ice maker assembly.
12
Reinstall the ice maker assembly by sliding it part way into the housing.
13
Reconnect the wire harness and push the assembly all the way back - be aware the ice maker fill spout may make this difficult.
14
Realign the side cover and slide it into place.
15
Realign the ice bin on the track and snap it into position.
16
With the repair completed, plug the power cord back in and your ice maker should be ready for use.
Applicable Product Model
Parts Needed
Ice Level Arm
$47.40
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com