Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Drawer Handle Replacement #W10357237K
Whirlpool Refrigerator Drawer Handle Replacement #W10357237K
Skill Level
Total Parts Cost
$117.59Estimated Savings
$112.5001:02
- Description
This video provides step-by-step repair instructions for replacing the drawer handle on a Whirlpool refrigerator. The most common reasons for replacing the drawer handle are when it is missing or broken.
All of the information for this refrigerator drawer handle support replacement video is applicable to the following brands:
Whirlpool
Tools needed: 1/8th inch Allen wrench
All of the information for this refrigerator drawer handle support replacement video is applicable to the following brands:
Whirlpool
Tools needed: 1/8th inch Allen wrench
Step By Step Instructions
1
Before you replace a drawer handle on your refrigerator consider using painters’ tape to help protect the stainless steel surface.
2
Use a 1/8th inch Allen wrench to unthread the set screws securing the old handle if still intact.
3
Pull the handle off.
4
Install the new drawer handle by aligning it on the mounting posts.
5
Then tighten the set screws to secure.
Description
This video provides step-by-step repair instructions for replacing the drawer handle on a Whirlpool refrigerator. The most common reasons for replacing the drawer handle are when it is missing or broken.
All of the information for this refrigerator drawer handle support replacement video is applicable to the following brands:
Whirlpool
Tools needed: 1/8th inch Allen wrench
All of the information for this refrigerator drawer handle support replacement video is applicable to the following brands:
Whirlpool
Tools needed: 1/8th inch Allen wrench
Step-By-Step Instructions
1
Before you replace a drawer handle on your refrigerator consider using painters’ tape to help protect the stainless steel surface.
2
Use a 1/8th inch Allen wrench to unthread the set screws securing the old handle if still intact.
3
Pull the handle off.
4
Install the new drawer handle by aligning it on the mounting posts.
5
Then tighten the set screws to secure.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com