Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRheem Furnace Isn't Working? Control Board #62-25338-01
Rheem Furnace Isn't Working? Control Board #62-25338-01
Skill Level
Total Parts Cost
$147.52Estimated Savings
$112.5002:31
- Description
Furnace not working? This video provides step-by-step instructions for replacing the control board on Rheem furnaces. The most common reason for replacing the control board is when the furnace is not heating.
All of the information in this control board replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing
Tools used: camera, flat-head screwdriver, needle-nose pliers
All of the information in this control board replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing
Tools used: camera, flat-head screwdriver, needle-nose pliers
Step By Step Instructions
1
To replace the control board in your furnace first turn off the power to the furnace.
2
To reach the board, you will need to remove both access panels.
3
Slide the upper panel up to detach followed by the lower panel.
4
Note the orientation of the wires connected to the control board then disconnect them.
5
Use needle-nose pliers to depress the tabs to release the old board from the mounting pins. You’re now ready to install the new control board.
6
Align the board on the mounting pins and snap it into place.
7
Connect the wires to the appropriate terminals on the new board.
8
Reinstall the lower access panel first followed by the upper panel.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Description
Furnace not working? This video provides step-by-step instructions for replacing the control board on Rheem furnaces. The most common reason for replacing the control board is when the furnace is not heating.
All of the information in this control board replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing
Tools used: camera, flat-head screwdriver, needle-nose pliers
All of the information in this control board replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing
Tools used: camera, flat-head screwdriver, needle-nose pliers
Step-By-Step Instructions
1
To replace the control board in your furnace first turn off the power to the furnace.
2
To reach the board, you will need to remove both access panels.
3
Slide the upper panel up to detach followed by the lower panel.
4
Note the orientation of the wires connected to the control board then disconnect them.
5
Use needle-nose pliers to depress the tabs to release the old board from the mounting pins. You’re now ready to install the new control board.
6
Align the board on the mounting pins and snap it into place.
7
Connect the wires to the appropriate terminals on the new board.
8
Reinstall the lower access panel first followed by the upper panel.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Control Board
$147.52
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com