Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRheem Furnace Not Heating? Furnace Flame Sensor #62-23543-01
Rheem Furnace Not Heating? Furnace Flame Sensor #62-23543-01
Skill Level
Total Parts Cost
$14.09Estimated Savings
$112.5001:35
- Description
Furnace not igniting or heating? This video provides step-by-step instructions for replacing the flame sensor on Rheem furnaces. The most common reason for replacing the flame sensor is if the furnace won't heat and testing the sensor proves it is at fault.
All of the information in this flame sensor replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing, Thermal Zone
All of the information in this flame sensor replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing, Thermal Zone
Step By Step Instructions
1
To replace the flame sensor in your furnace first turn off the power to the furnace.
2
Slide the upper access panel up to detach.
3
Use a long flat-head screwdriver to unthread the mounting screw securing the flame sensor.
4
Pull out the old sensor and disconnect the wire.
5
Install the new flame sensor by first connecting the wire.
6
Carefully position the new sensor on the burner bracket.
7
Rethread the mounting screw to secure.
8
Replace the upper access panel.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Description
Furnace not igniting or heating? This video provides step-by-step instructions for replacing the flame sensor on Rheem furnaces. The most common reason for replacing the flame sensor is if the furnace won't heat and testing the sensor proves it is at fault.
All of the information in this flame sensor replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing, Thermal Zone
All of the information in this flame sensor replacement video is applicable to the following brands: Rheem, Ruud, DuroGuard, WeatherKing, Thermal Zone
Step-By-Step Instructions
1
To replace the flame sensor in your furnace first turn off the power to the furnace.
2
Slide the upper access panel up to detach.
3
Use a long flat-head screwdriver to unthread the mounting screw securing the flame sensor.
4
Pull out the old sensor and disconnect the wire.
5
Install the new flame sensor by first connecting the wire.
6
Carefully position the new sensor on the burner bracket.
7
Rethread the mounting screw to secure.
8
Replace the upper access panel.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Flame Sensor
$14.09
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com