Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Gas Range/Oven Control Panel Replacement #AGM73590311
LG Gas Range/Oven Control Panel Replacement #AGM73590311
Skill Level
Total Parts Cost
$209.94Estimated Savings
$112.5004:41
- Description
This video provides step-by-step repair instructions for replacing the oven control panel an LG gas range. The most common reason for replacing the control panel is when one or more of the display board buttons aren't working.
All of the information for this oven control panel replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
All of the information for this oven control panel replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
Step By Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control panel on your range first use a phillips-head screwdriver to unthread the screws securing the upper rear access panel brackets.
3
Carefully remove the brackets.
4
Next, remove the screws securing the panel itself.
5
Lift the panel up and out to detach.
6
Now disconnect the ribbon connecter from the control board.
7
Next, remove the screws securing the control assembly.
8
Set the assembly aside.
9
Now remove the screw securing the wire retainer.
10
Unthread the two screws at the rear securing the oven control panel.
11
Next, use a short phillips-head screwdriver to remove the screws in the front securing the deflector.
12
Set the deflector aside.
13
You can now lift the old control panel up from the bottom to remove.
14
Install the new oven control panel by aligning it on the frame making sure the lower mounting tabs are positioned underneath the frame.
15
Realign the deflector and thread the screws to secure.
16
Replace the screws at the rear.
17
Align the wire retainer and secure it with the screw.
18
Position the control assembly on the new control panel and replace the screws to secure.
19
Connect the ribbon connecter to the control board and secure the wires in the retainer.
20
Replace the upper access panel and secure it with the screws.
21
Now replace the brackets and rethread the screws to secure.
22
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven control panel an LG gas range. The most common reason for replacing the control panel is when one or more of the display board buttons aren't working.
All of the information for this oven control panel replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
All of the information for this oven control panel replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
Step-By-Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control panel on your range first use a phillips-head screwdriver to unthread the screws securing the upper rear access panel brackets.
3
Carefully remove the brackets.
4
Next, remove the screws securing the panel itself.
5
Lift the panel up and out to detach.
6
Now disconnect the ribbon connecter from the control board.
7
Next, remove the screws securing the control assembly.
8
Set the assembly aside.
9
Now remove the screw securing the wire retainer.
10
Unthread the two screws at the rear securing the oven control panel.
11
Next, use a short phillips-head screwdriver to remove the screws in the front securing the deflector.
12
Set the deflector aside.
13
You can now lift the old control panel up from the bottom to remove.
14
Install the new oven control panel by aligning it on the frame making sure the lower mounting tabs are positioned underneath the frame.
15
Realign the deflector and thread the screws to secure.
16
Replace the screws at the rear.
17
Align the wire retainer and secure it with the screw.
18
Position the control assembly on the new control panel and replace the screws to secure.
19
Connect the ribbon connecter to the control board and secure the wires in the retainer.
20
Replace the upper access panel and secure it with the screws.
21
Now replace the brackets and rethread the screws to secure.
22
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com