Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Replace Ice Dispenser Control Board #WR55X10443
GE Refrigerator Replace Ice Dispenser Control Board #WR55X10443
Skill Level
Total Parts Cost
$256.18Estimated Savings
$112.5001:36
- Description
This video provides step-by-step repair instructions for replacing the dispenser control board on a Whirlpool refrigerator. The most common reason for replacing the control board is when none of the buttons are working.
All of the information for this dispenser control board replacement video is applicable to the following brands: GE
Tools needed: flat-head screwdriver
All of the information for this dispenser control board replacement video is applicable to the following brands: GE
Tools needed: flat-head screwdriver
Step By Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the dispenser control board assembly in your refrigerator use a small flat-head screwdriver to help pry the dispenser panel and control board out from the bottom.
3
Note the orientation of the wires connected to the board then disconnect them.
4
Before you install the new dispenser control board assembly peel off the protective covering.
5
Connect the wires to the appropriate terminals on the new board.
6
Now align the top of the new dispenser panel and snap the bottom into place.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser control board on a Whirlpool refrigerator. The most common reason for replacing the control board is when none of the buttons are working.
All of the information for this dispenser control board replacement video is applicable to the following brands: GE
Tools needed: flat-head screwdriver
All of the information for this dispenser control board replacement video is applicable to the following brands: GE
Tools needed: flat-head screwdriver
Step-By-Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the dispenser control board assembly in your refrigerator use a small flat-head screwdriver to help pry the dispenser panel and control board out from the bottom.
3
Note the orientation of the wires connected to the board then disconnect them.
4
Before you install the new dispenser control board assembly peel off the protective covering.
5
Connect the wires to the appropriate terminals on the new board.
6
Now align the top of the new dispenser panel and snap the bottom into place.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com