Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Noisy? Replace Evaporator Fan Blade WR60X10208
GE Refrigerator Noisy? Replace Evaporator Fan Blade WR60X10208
Skill Level
Total Parts Cost
$78.00Estimated Savings
$112.5003:57
- Description
This video provides step-by-step repair instructions for replacing the evaporator fan blade on a GE refrigerator. The most common reason for replacing the fan blade is if it is broken, causing the fridge to run loudly.
All of the information for this evaporator fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
All of the information for this evaporator fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
Step By Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the evaporator fan blade in your refrigerator open the freezer door, lift out the ice bucket and remove the shelf.
3
Next, use a quarter inch socket or nut driver to remove the screws securing the auger motor assembly.
4
Lift the motor assembly off of the mounting brackets and disconnect the wire connecter to fully remove the assembly.
5
Next, remove any shelving blocking the fan cover.
6
Lift off the light cover.
7
Unthread the light bulb.
8
Now remove the lower screws securing the fan cover.
9
Loosen the upper screws.
10
Lift the cover up and out.
11
You can now lift off the old evaporator fan blade.
12
Install the new evaporator fan blade by properly aligning it on the motor shaft and pushing it into place.
13
Realign the fan cover on the upper screws with the top edge positioned behind the ice maker.
14
Slide the cover down into place.
15
Tighten the upper screws and replace the lower ones.
16
Rethread the light bulb.
17
Replace the light cover.
18
Reposition the upper shelving if applicable.
19
Reinstall the auger motor assembly in the freezer by first connecting the wire connecter.
20
Reposition the assembly on the mounting brackets and replace the screws to secure.
21
Slide the shelf and ice bucket back into place.
22
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the evaporator fan blade on a GE refrigerator. The most common reason for replacing the fan blade is if it is broken, causing the fridge to run loudly.
All of the information for this evaporator fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
All of the information for this evaporator fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
Step-By-Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the evaporator fan blade in your refrigerator open the freezer door, lift out the ice bucket and remove the shelf.
3
Next, use a quarter inch socket or nut driver to remove the screws securing the auger motor assembly.
4
Lift the motor assembly off of the mounting brackets and disconnect the wire connecter to fully remove the assembly.
5
Next, remove any shelving blocking the fan cover.
6
Lift off the light cover.
7
Unthread the light bulb.
8
Now remove the lower screws securing the fan cover.
9
Loosen the upper screws.
10
Lift the cover up and out.
11
You can now lift off the old evaporator fan blade.
12
Install the new evaporator fan blade by properly aligning it on the motor shaft and pushing it into place.
13
Realign the fan cover on the upper screws with the top edge positioned behind the ice maker.
14
Slide the cover down into place.
15
Tighten the upper screws and replace the lower ones.
16
Rethread the light bulb.
17
Replace the light cover.
18
Reposition the upper shelving if applicable.
19
Reinstall the auger motor assembly in the freezer by first connecting the wire connecter.
20
Reposition the assembly on the mounting brackets and replace the screws to secure.
21
Slide the shelf and ice bucket back into place.
22
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Evaporator Fan Blade
$78.00
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com