Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Noisy? Replace Condenser Fan Blade #WR60X10207
GE Refrigerator Noisy? Replace Condenser Fan Blade #WR60X10207
Skill Level
Total Parts Cost
$9.42Estimated Savings
$112.5001:56
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a GE refrigerator. The most common reason for replacing the fan blade is if it is broken, causing the fridge to run loudly.
All of the information for this condenser fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
All of the information for this condenser fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
Step By Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the condenser fan blade in your refrigerator use a quarter inch socket or nut driver to unthread the screws securing the lower rear access panel.
3
With the screws unthreaded, carefully remove the panel.
4
You can now pull the old condenser fan blade off of the motor shaft if still intact.
5
Install the new condenser fan blade by properly aligning it on the motor shaft then push it into place.
6
Reposition the access panel and replace the screws to secure.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a GE refrigerator. The most common reason for replacing the fan blade is if it is broken, causing the fridge to run loudly.
All of the information for this condenser fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
All of the information for this condenser fan blade video is applicable to the following brands:
GE
Tools needed: quarter inch socket
Step-By-Step Instructions
1
As with most appliance repairs, you should unplug the power cord before beginning.
2
To replace the condenser fan blade in your refrigerator use a quarter inch socket or nut driver to unthread the screws securing the lower rear access panel.
3
With the screws unthreaded, carefully remove the panel.
4
You can now pull the old condenser fan blade off of the motor shaft if still intact.
5
Install the new condenser fan blade by properly aligning it on the motor shaft then push it into place.
6
Reposition the access panel and replace the screws to secure.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$9.42
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com