Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Check Valve Replacement #WD24X10018
GE Dishwasher Check Valve Replacement #WD24X10018
Skill Level
Total Parts Cost
$24.85Estimated Savings
$112.5001:54
- Description
This video provides step-by-step instructions for replacing the check valve on GE dishwashers. The most common reason for replacing the check valve is if it gets stuck closed, preventing the dishwasher from draining.
All of the information in this check valve video is applicable to the following brands: GE
All of the information in this check valve video is applicable to the following brands: GE
Step By Step Instructions
1
Before you replace the check valve in your dishwasher be sure to turn off the power to the appliance.
2
Now remove the lower dish rack.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear filter assembly.
4
Lift off the assembly and use needle-nose pliers to loosen the check valve by rotating it counter-clockwise.
5
Fully unthread the old valve.
6
Install the new check valve by threading it clockwise into the base.
7
Tighten with the pliers.
8
Reposition the rear filter assembly and rethread the screws to secure.
9
Replace the lower dish rack
10
Turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the check valve on GE dishwashers. The most common reason for replacing the check valve is if it gets stuck closed, preventing the dishwasher from draining.
All of the information in this check valve video is applicable to the following brands: GE
All of the information in this check valve video is applicable to the following brands: GE
Step-By-Step Instructions
1
Before you replace the check valve in your dishwasher be sure to turn off the power to the appliance.
2
Now remove the lower dish rack.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear filter assembly.
4
Lift off the assembly and use needle-nose pliers to loosen the check valve by rotating it counter-clockwise.
5
Fully unthread the old valve.
6
Install the new check valve by threading it clockwise into the base.
7
Tighten with the pliers.
8
Reposition the rear filter assembly and rethread the screws to secure.
9
Replace the lower dish rack
10
Turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com