Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Chamber Hose Replacement #Wd24X10015
GE Dishwasher Chamber Hose Replacement #Wd24X10015
Skill Level
Total Parts Cost
$32.91Estimated Savings
$112.5006:05
- Description
This video provides step-by-step repair instructions for replacing the chamber hose on a GE dishwasher. The most common reasons for replacing the chamber hose is the dishwasher leaker water.
All of the information in this chamber hose replacement video is applicable to the following brands: GE
All of the information in this chamber hose replacement video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the chamber hose on your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel or panels and remove them.
4
Use a 5/8th inch wrench to help unthread the water supply line from the inlet valve be prepared for some water to spill.
5
Next, use a 5/16th inch socket or nut driver to unthread the screw securing the junction box cover. Then pull the cover off.
6
Note the location of the wires then untwist the wire nuts to disconnect the wires.
7
Unthread the strain relief nut and detach the strain relief from the junction box.
8
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
9
Open the dishwasher door and remove the mounting bracket screws.
10
To move the dishwasher, you may need to adjust the legs to lower the appliance.
11
Now, very carefully pull the dishwasher away from the cabinet.
12
Use the quarter-inch socket or nut driver to loosen the clamp securing the chamber hose to the circulation pump.
13
Pull the hose off – be prepared for some water to spill.
14
Release the spring clamp securing the opposite end to the chamber and fully remove the old hose.
15
Prepare the new chamber hose for installation by transferring both clamps from the old hose to the new one.
16
Attach one end to the chamber port and secure it with the spring clamp.
17
Attach the opposite end to the port on the circulation pump and tighten the clamp to secure.
18
Make sure the end of the drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
19
Adjust the leveling legs if necessary.
20
Replace the screws to secure the mounting brackets to the cabinet or countertop.
21
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
22
Make sure the hose is elevated above the connection point.
23
Fully position the wire strain relief in the junction box and secure the strain relief nut.
24
Connect the wires using the wire nuts.
25
Align the cover and replace the screw to secure.
26
Reconnect the water supply line to the inlet valve.
27
Reposition the lower access panel or panels and replace the screws to secure it.
28
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the chamber hose on a GE dishwasher. The most common reasons for replacing the chamber hose is the dishwasher leaker water.
All of the information in this chamber hose replacement video is applicable to the following brands: GE
All of the information in this chamber hose replacement video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the chamber hose on your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel or panels and remove them.
4
Use a 5/8th inch wrench to help unthread the water supply line from the inlet valve be prepared for some water to spill.
5
Next, use a 5/16th inch socket or nut driver to unthread the screw securing the junction box cover. Then pull the cover off.
6
Note the location of the wires then untwist the wire nuts to disconnect the wires.
7
Unthread the strain relief nut and detach the strain relief from the junction box.
8
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
9
Open the dishwasher door and remove the mounting bracket screws.
10
To move the dishwasher, you may need to adjust the legs to lower the appliance.
11
Now, very carefully pull the dishwasher away from the cabinet.
12
Use the quarter-inch socket or nut driver to loosen the clamp securing the chamber hose to the circulation pump.
13
Pull the hose off – be prepared for some water to spill.
14
Release the spring clamp securing the opposite end to the chamber and fully remove the old hose.
15
Prepare the new chamber hose for installation by transferring both clamps from the old hose to the new one.
16
Attach one end to the chamber port and secure it with the spring clamp.
17
Attach the opposite end to the port on the circulation pump and tighten the clamp to secure.
18
Make sure the end of the drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
19
Adjust the leveling legs if necessary.
20
Replace the screws to secure the mounting brackets to the cabinet or countertop.
21
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
22
Make sure the hose is elevated above the connection point.
23
Fully position the wire strain relief in the junction box and secure the strain relief nut.
24
Connect the wires using the wire nuts.
25
Align the cover and replace the screw to secure.
26
Reconnect the water supply line to the inlet valve.
27
Reposition the lower access panel or panels and replace the screws to secure it.
28
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$9.80
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com