Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairPayne Furnace Drain Trap Replacement #328060-701
Payne Furnace Drain Trap Replacement #328060-701
Skill Level
Total Parts Cost
$52.03Estimated Savings
$112.5003:24
- Description
This video provides step-by-step instructions for replacing the drain trap on Payne furnaces. The most common reasons for replacing the drain trap is if the furnace is leaking water.
All of the information in this drain trap replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, pliers
All of the information in this drain trap replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, pliers
Step By Step Instructions
1
Before you replace the drain trap in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Next, unthread the screws to release the lower access panel.
5
Use a small flat-head screwdriver to depress the tab to detach the door switch from the support rail.
6
Now note the location of the drain trap hoses then release the spring clamps and pull all three hoses off.
7
Remove the drain hose as well.
8
Next, unthread the screws securing the trap and remove the old trap.
9
Install the new drain trap by positioning it in the mounting bracket.
10
Thread the screws to secure.
11
Attach the hoses to the appropriate ports and secure.
12
Attach the drain hose to the trap as well.
13
Reinstall the door switch.
14
Realign the lower access panel and rethread the screws.
15
Realign the upper access panel and secure it with the screws.
16
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the drain trap on Payne furnaces. The most common reasons for replacing the drain trap is if the furnace is leaking water.
All of the information in this drain trap replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, pliers
All of the information in this drain trap replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the drain trap in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Next, unthread the screws to release the lower access panel.
5
Use a small flat-head screwdriver to depress the tab to detach the door switch from the support rail.
6
Now note the location of the drain trap hoses then release the spring clamps and pull all three hoses off.
7
Remove the drain hose as well.
8
Next, unthread the screws securing the trap and remove the old trap.
9
Install the new drain trap by positioning it in the mounting bracket.
10
Thread the screws to secure.
11
Attach the hoses to the appropriate ports and secure.
12
Attach the drain hose to the trap as well.
13
Reinstall the door switch.
14
Realign the lower access panel and rethread the screws.
15
Realign the upper access panel and secure it with the screws.
16
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Drip Tray
$52.03
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com