Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairPayne Furnace Transformer Replacement #HT01BC117
Payne Furnace Transformer Replacement #HT01BC117
Skill Level
Total Parts Cost
$71.78Estimated Savings
$112.5002:18
- Description
This video provides step-by-step instructions for replacing the transformer on Payne furnaces. The most common reason for replacing the transformer is the furnace not running at all.
All of the information in this transformer replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
All of the information in this transformer replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
Step By Step Instructions
1
Before you replace the transformer in your furnace first turn off the power to the furnace.
2
Use a flat-head screwdriver to unthread the screws securing the lower access panel and remove the panel.
3
Note the orientation of the transformer wires connected to the control board then disconnect them.
4
Use a quarter-inch socket or nut driver to unthread the transformer mounting screw to fully remove the old component.
5
Install the new transformer by positioning it on the control board mounting plate and threading the mounting screw to secure.
6
Connect the new transformer wires to the appropriate terminals on the control board.
7
Realign the lower access panel and rethread the screws.
8
With the repair completed, turn the power supply back on and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the transformer on Payne furnaces. The most common reason for replacing the transformer is the furnace not running at all.
All of the information in this transformer replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
All of the information in this transformer replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
Step-By-Step Instructions
1
Before you replace the transformer in your furnace first turn off the power to the furnace.
2
Use a flat-head screwdriver to unthread the screws securing the lower access panel and remove the panel.
3
Note the orientation of the transformer wires connected to the control board then disconnect them.
4
Use a quarter-inch socket or nut driver to unthread the transformer mounting screw to fully remove the old component.
5
Install the new transformer by positioning it on the control board mounting plate and threading the mounting screw to secure.
6
Connect the new transformer wires to the appropriate terminals on the control board.
7
Realign the lower access panel and rethread the screws.
8
With the repair completed, turn the power supply back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Transformer
$71.78
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com