Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairPayne Furnace Igniter Replacement #LH33ZG002
Payne Furnace Igniter Replacement #LH33ZG002
Skill Level
Total Parts Cost
$77.73Estimated Savings
$112.5002:01
- Description
This video provides step-by-step instructions for replacing the igniter on Payne furnaces. The most common reason for replacing the igniter is the fan running but the burners never lighting.
All of the information in this igniter replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
All of the information in this igniter replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
Step By Step Instructions
1
Before you replace the igniter in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Use a quarter-inch socket to unthread the mounting screw securing the old igniter.
5
Disconnect the wire connecter to fully remove.
6
Install the new igniter by first connecting the wire connecter.
7
Now carefully insert the igniter through the hole in the burner box then thread and tighten the mounting screw.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the igniter on Payne furnaces. The most common reason for replacing the igniter is the fan running but the burners never lighting.
All of the information in this igniter replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
All of the information in this igniter replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, 1/4 inch socket
Step-By-Step Instructions
1
Before you replace the igniter in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Use a quarter-inch socket to unthread the mounting screw securing the old igniter.
5
Disconnect the wire connecter to fully remove.
6
Install the new igniter by first connecting the wire connecter.
7
Now carefully insert the igniter through the hole in the burner box then thread and tighten the mounting screw.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Igniter
$77.73
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com