Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairPayne Furnace Flame Rollout Switch Replacement #HH680348
Payne Furnace Flame Rollout Switch Replacement #HH680348
Skill Level
Total Parts Cost
$16.07Estimated Savings
$112.5002:07
- Description
This video provides step-by-step instructions for replacing the flame rollout switch on Payne furnaces. The most common reason for replacing the rollout switch is the burners igniting and then shutting off repeatedly.
All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, quarter inch socket
All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, quarter inch socket
Step By Step Instructions
1
Before you replace a flame rollout switch in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Disconnect the wires from the rollout switch you’re replacing.
5
Now use a quarter-inch socket or wrench to unthread the mounting screws to release the old switch.
6
Install the new flame rollout switch by positioning it on the burner box and thread the mounting screws to secure.
7
Connect the wires to the terminals on the new switch.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the flame rollout switch on Payne furnaces. The most common reason for replacing the rollout switch is the burners igniting and then shutting off repeatedly.
All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, quarter inch socket
All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne
Tools used: flat head screwdriver, quarter inch socket
Step-By-Step Instructions
1
Before you replace a flame rollout switch in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Disconnect the wires from the rollout switch you’re replacing.
5
Now use a quarter-inch socket or wrench to unthread the mounting screws to release the old switch.
6
Install the new flame rollout switch by positioning it on the burner box and thread the mounting screws to secure.
7
Connect the wires to the terminals on the new switch.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com