Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Washer Agitator Ring Replacement #285587
Whirlpool/Kenmore Washer Agitator Ring Replacement #285587
Skill Level
Total Parts Cost
$8.80Estimated Savings
$112.5001:49
- Description
This video provides step-by-step instructions for replacing the agitator ring on top loading direct drive Whirlpool washing machine. The most common reason for replacing the agitator ring is when the upper part of the agitator slips or doesn’t agitate enough.
All the information in this agitator ring replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: flat-head screwdriver, Phillips head screwdriver, pliers, putty knife, 7/16” socket
All the information in this agitator ring replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: flat-head screwdriver, Phillips head screwdriver, pliers, putty knife, 7/16” socket
Step By Step Instructions
1
If your model has a rinse dispenser, you’ll need to remove it first.
2
If the dispenser has a lock ring, pull the ring up with your fingers, then twist the dispenser upwards to remove.
3
Next, remove the agitator cap.
4
Use a flathead screwdriver to help pry it off.
5
Depending on your model, you may also need to remove a dust cap.
6
Hold the agitator base and use a 7/16th inch socket to remove the bolt and washer.
7
Lift the agitator off of the drive shaft.
8
With the agitator on the floor, place both feet on the base and pull the top portion off to access the agitator ring.
9
Remove the old ring.
10
Install the new agitator ring
11
By aligning the four tabs in the ring with the four slots in the agitator base so it rests flush against the rim.
12
Align the slots in the top portion of the agitator with the tabs in the base and snap into position.
13
Place the agitator back onto the drive shaft and reinstall the bolt and washer.
14
Replace the dust cap if your model has one.
15
Snap on the agitator cap.
16
If your model has a rinse dispenser, push it down until it snaps into place and press the lock ring down with your thumbs.
17
You’re now ready to turn on the appliance to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the agitator ring on top loading direct drive Whirlpool washing machine. The most common reason for replacing the agitator ring is when the upper part of the agitator slips or doesn’t agitate enough.
All the information in this agitator ring replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: flat-head screwdriver, Phillips head screwdriver, pliers, putty knife, 7/16” socket
All the information in this agitator ring replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral
Tools used: flat-head screwdriver, Phillips head screwdriver, pliers, putty knife, 7/16” socket
Step-By-Step Instructions
1
If your model has a rinse dispenser, you’ll need to remove it first.
2
If the dispenser has a lock ring, pull the ring up with your fingers, then twist the dispenser upwards to remove.
3
Next, remove the agitator cap.
4
Use a flathead screwdriver to help pry it off.
5
Depending on your model, you may also need to remove a dust cap.
6
Hold the agitator base and use a 7/16th inch socket to remove the bolt and washer.
7
Lift the agitator off of the drive shaft.
8
With the agitator on the floor, place both feet on the base and pull the top portion off to access the agitator ring.
9
Remove the old ring.
10
Install the new agitator ring
11
By aligning the four tabs in the ring with the four slots in the agitator base so it rests flush against the rim.
12
Align the slots in the top portion of the agitator with the tabs in the base and snap into position.
13
Place the agitator back onto the drive shaft and reinstall the bolt and washer.
14
Replace the dust cap if your model has one.
15
Snap on the agitator cap.
16
If your model has a rinse dispenser, push it down until it snaps into place and press the lock ring down with your thumbs.
17
You’re now ready to turn on the appliance to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Agitator Cam
$8.80
Total$0.00
Related Articles & Videos
04:10
Part Replacement
Washer Won't Spin? Replace Whirlpool Direct Drive Clutch Assembly Part # 285785
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com