DescriptionThis video provides step-by-step repair instructions for replacing the door gasket on a Whirlpool electric range. The most common reason for replacing the door gasket is the oven leaking too much heat from around the door.
All of the information for this door gasket replacement video is applicable to the following brands:
Whirlpool
Tools needed: pliers
Step-By-Step Instructions1
To replace the door gasket on your range, open the oven door and remove the ends of the old gasket from the slots in the frame.
2
Pull all of the retainers free to remove the old gasket.
3
When installing the new oven door gasket start at the bottom and snap all of the gasket retainers into the holes in the frame.
4
With the gasket in place, insert both ends into the slots in the frame.
5
With the repair completed confirm that the oven door closes and seals properly.