Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range 8" Surface Element Replacement #W10169799
Whirlpool Range 8" Surface Element Replacement #W10169799
Skill Level
Total Parts Cost
$84.94Estimated Savings
$112.5002:46
- Description
This video provides step-by-step repair instructions for replacing the surface element on a Whirlpool electric range. The most common reason for replacing the surface element is the element not turning on.
All of the information for this surface element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver, pliers
All of the information for this surface element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver, pliers
Step By Step Instructions
1
Before you replace the eight inch dual surface element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Note the location of the surface element wires then disconnect them.
5
Use pliers to help release the element retaining clips and remove the old element.
6
Prepare the new surface element for installation by transferring the retaining clips from the old element to the new one.
7
Be sure to position the clips in the proper location.
8
Now insert the retaining clips into the slots and snap the element into place.
9
Connect the wires to the appropriate terminals.
10
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
11
Thread the screws to secure the top.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the surface element on a Whirlpool electric range. The most common reason for replacing the surface element is the element not turning on.
All of the information for this surface element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver, pliers
All of the information for this surface element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the eight inch dual surface element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Note the location of the surface element wires then disconnect them.
5
Use pliers to help release the element retaining clips and remove the old element.
6
Prepare the new surface element for installation by transferring the retaining clips from the old element to the new one.
7
Be sure to position the clips in the proper location.
8
Now insert the retaining clips into the slots and snap the element into place.
9
Connect the wires to the appropriate terminals.
10
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
11
Thread the screws to secure the top.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Parts Needed
Radiant Surface Element
$84.94
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:08
Part Replacement
Kitchenaid Electric Downdraft Cooktop Surface Element (3000W) Replacement #W10823729
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com