Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Dishwasher Wax Motor Actuator Replacement #902899
Maytag Dishwasher Wax Motor Actuator Replacement #902899
Skill Level
Total Parts Cost
$54.24Estimated Savings
$112.5001:21
- Description
This video provides step-by-step repair instructions for replacing the wax motor actuator (or dispenser actuator) on a Maytag dishwasher. The most common reason for replacing the wax motor actuator is when the dishwasher dispenser isn't working.
All of the information for this wax motor actuator replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool
Tools needed: Torx screwdriver
All of the information for this wax motor actuator replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool
Tools needed: Torx screwdriver
Step By Step Instructions
1
Before you begin, be sure to turn off the power supply to your dishwasher.
2
Your first step is to remove the screws to release the inner door panel.
3
Next, pull the tabs to release the old wax motor actuator from the latch assembly and disconnect the wires.
4
Install the new wax motor actuator by first reconnecting the wires then snap it into position, making sure the plunger is seated in the slider.
5
Replace the inner door panel and secure it with the screws.
6
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the wax motor actuator (or dispenser actuator) on a Maytag dishwasher. The most common reason for replacing the wax motor actuator is when the dishwasher dispenser isn't working.
All of the information for this wax motor actuator replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool
Tools needed: Torx screwdriver
All of the information for this wax motor actuator replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool
Tools needed: Torx screwdriver
Step-By-Step Instructions
1
Before you begin, be sure to turn off the power supply to your dishwasher.
2
Your first step is to remove the screws to release the inner door panel.
3
Next, pull the tabs to release the old wax motor actuator from the latch assembly and disconnect the wires.
4
Install the new wax motor actuator by first reconnecting the wires then snap it into position, making sure the plunger is seated in the slider.
5
Replace the inner door panel and secure it with the screws.
6
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com