Video & Articles: Appliance & Equipment RepairWhirlpool Range/Oven Outer Door Glass Replacement #W10333988

Whirlpool Range/Oven Outer Door Glass Replacement #W10333988

03:32
This video provides step-by-step repair instructions for replacing the outer door glass on a Whirlpool electric range. The most common reasons for replacing the outer door glass are if it is dirty or broken.

All of the information for this outer door glass replacement video is applicable to the following brands:
Whirlpool

Tools needed: flat head screwdriver, phillips head screwdriver, pliers, two sided tape, putty knife

Step By Step Instructions

1
To replace the outer door glass on your range use a small flat-head screwdriver to help lift up the hinge locks then remove the door from the frame and set it on a sturdy surface.
2
Use a phillips-head screwdriver to unthread the screws securing the inner door panel to the outer panel.
3
Carefully lift off the inner panel.
4
Remove the handle support.
5
The door glass is secured with two-sided tape so use a putty knife to break the seal to remove the old glass.
6
Remove the old tape from the outer door panel.
7
Before you install the new outer door glass
8
Apply some two-sided tape to the sides and center of the outer door panel.
9
Depending on the thickness of the tape, you may need to use more than one layer.
10
Now align the new glass on the panel and press firmly to adhere the tape.
11
Realign the support on the outer door panel.
12
Join the inner and outer door panels together and rethread the screws to secure.
13
Reinstall the door by hooking the hinges onto the frame.
14
Flip the hinge locks down and close the door.
Description
This video provides step-by-step repair instructions for replacing the outer door glass on a Whirlpool electric range. The most common reasons for replacing the outer door glass are if it is dirty or broken.

All of the information for this outer door glass replacement video is applicable to the following brands:
Whirlpool

Tools needed: flat head screwdriver, phillips head screwdriver, pliers, two sided tape, putty knife
Step-By-Step Instructions
1
To replace the outer door glass on your range use a small flat-head screwdriver to help lift up the hinge locks then remove the door from the frame and set it on a sturdy surface.
2
Use a phillips-head screwdriver to unthread the screws securing the inner door panel to the outer panel.
3
Carefully lift off the inner panel.
4
Remove the handle support.
5
The door glass is secured with two-sided tape so use a putty knife to break the seal to remove the old glass.
6
Remove the old tape from the outer door panel.
7
Before you install the new outer door glass
8
Apply some two-sided tape to the sides and center of the outer door panel.
9
Depending on the thickness of the tape, you may need to use more than one layer.
10
Now align the new glass on the panel and press firmly to adhere the tape.
11
Realign the support on the outer door panel.
12
Join the inner and outer door panels together and rethread the screws to secure.
13
Reinstall the door by hooking the hinges onto the frame.
14
Flip the hinge locks down and close the door.

Applicable Product Model

Range/Stove/Oven
Brand
Product Type
Model
Subtype
Electric
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

03:18
Part Replacement
Whirlpool Range Oven Bake Element Replacement #w10779716
02:15
Part Replacement
Whirlpool Range Main Top Replacement #W10472035
02:35
Part Replacement
Whirlpool Oven Not Turning On? Replace Control Board W10349740
02:05
Part Replacement
Whirlpool Range Oven Temperature Sensor Replacement #w10181986
03:36
Part Replacement
Whirlpool Range Oven Replace Inner Door Glass #w10300487