Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Replace Small Engine Breather Tube Part # 590522
Briggs & Stratton Replace Small Engine Breather Tube Part # 590522
Skill Level
Total Parts Cost
$11.02Estimated Savings
$112.5002:36
- Description
This video provides step-by-step repair instructions for replacing the breather tube on a Briggs and Stratton small engine. The most common reason for replacing the breather tube is the engine not running smoothly.
All of the information for this breather tube replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: 5/16 inch socket or nut driver
All of the information for this breather tube replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: 5/16 inch socket or nut driver
Step By Step Instructions
1
Before you replace the breather tube on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now loosen the rope guide wing nut and remove the starter rope.
5
Use a 5/16th inch socket or nut driver to unthread the bolts securing the blower housing cover.
6
Lift off the cover.
7
Lift the fuel tank off of the housing.
8
Detach the old breather tube from the air filter housing and pull it out of the crankcase.
9
Install the new breather tube by inserting the tapered end into the hole in the crankcase until the lip is fully flush.
10
Attach the opposite end of the tube to the air filter housing.
11
Realign the fuel tank tabs with the slots in the blower housing and snap the tank into place.
12
Replace the blower housing cover then thread and tighten the bolts to secure.
13
Depress the bail arm extend the starter rope and hook the rope on the guide.
14
Tighten the rope guide wing nut.
15
With the repair completed reattach the wire and boot to the spark plug refill the fuel tank and your engine should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the breather tube on a Briggs and Stratton small engine. The most common reason for replacing the breather tube is the engine not running smoothly.
All of the information for this breather tube replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: 5/16 inch socket or nut driver
All of the information for this breather tube replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: 5/16 inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the breather tube on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now loosen the rope guide wing nut and remove the starter rope.
5
Use a 5/16th inch socket or nut driver to unthread the bolts securing the blower housing cover.
6
Lift off the cover.
7
Lift the fuel tank off of the housing.
8
Detach the old breather tube from the air filter housing and pull it out of the crankcase.
9
Install the new breather tube by inserting the tapered end into the hole in the crankcase until the lip is fully flush.
10
Attach the opposite end of the tube to the air filter housing.
11
Realign the fuel tank tabs with the slots in the blower housing and snap the tank into place.
12
Replace the blower housing cover then thread and tighten the bolts to secure.
13
Depress the bail arm extend the starter rope and hook the rope on the guide.
14
Tighten the rope guide wing nut.
15
With the repair completed reattach the wire and boot to the spark plug refill the fuel tank and your engine should be ready for use.
Applicable Product Model
Parts Needed
Breather Tube
$11.02
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Briggs & Stratton Small Engine Carburetor Replacement Part # 799584
03:07
Part Replacement
Briggs & Stratton Small Engine Ignition Coil Replacement Part # 593872
01:40
Part Replacement
Briggs & Stratton Small Engine Spark Plug Replacement Part # 692051
06:24
Part Replacement
Briggs & Stratton Small Engine Replace Governor Lever Part # 590520
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com