Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Small Engine Blower Housing Cover Part # 593961
Briggs & Stratton Small Engine Blower Housing Cover Part # 593961
Skill Level
Total Parts Cost
$40.48Estimated Savings
$112.5002:37
- Description
This video provides step-by-step repair instructions for replacing the blower housing cover on a Briggs and Stratton small engine. The most common reason for replacing the cover is if it is broken.
All of the information for this cover replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: flat head screwdriver, 5/16 inch socket or nut driver
All of the information for this cover replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: flat head screwdriver, 5/16 inch socket or nut driver
Step By Step Instructions
1
Before you replace the blower housing cover on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now loosen the rope guide wing nut and remove the starter rope.
4
Use a 5/16th inch socket or nut driver to unthread the bolts securing the blower housing cover and starter.
5
Lift off the assembly.
6
Pull off the retaining ring.
7
Note the orientation of the recoil starter then insert a flat-head screwdriver between the tabs securing the starter to help pry the component free. You’re now ready to install the new blower housing cover.
8
With the starter rope facing the rear of the new cover, snap the recoil starter into position.
9
Align the retaining ring and snap it into place.
10
Now align the assembly on the blower housing.
11
Thread and tighten the bolts to secure.
12
Depress the bail arm extend the starter rope and hook the rope on the guide.
13
Tighten the rope guide wing nut.
14
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the blower housing cover on a Briggs and Stratton small engine. The most common reason for replacing the cover is if it is broken.
All of the information for this cover replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: flat head screwdriver, 5/16 inch socket or nut driver
All of the information for this cover replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: flat head screwdriver, 5/16 inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the blower housing cover on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now loosen the rope guide wing nut and remove the starter rope.
4
Use a 5/16th inch socket or nut driver to unthread the bolts securing the blower housing cover and starter.
5
Lift off the assembly.
6
Pull off the retaining ring.
7
Note the orientation of the recoil starter then insert a flat-head screwdriver between the tabs securing the starter to help pry the component free. You’re now ready to install the new blower housing cover.
8
With the starter rope facing the rear of the new cover, snap the recoil starter into position.
9
Align the retaining ring and snap it into place.
10
Now align the assembly on the blower housing.
11
Thread and tighten the bolts to secure.
12
Depress the bail arm extend the starter rope and hook the rope on the guide.
13
Tighten the rope guide wing nut.
14
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Applicable Product Model
Parts Needed
Blower Housing
$40.48
Total$0.00
Related Articles & Videos
03:06
Part Replacement
Briggs & Stratton Small Engine Recoil Starter Assembly Part # 591139
04:55
Part Replacement
Briggs & Stratton Small Engine Carburetor Replacement Part # 799584
03:07
Part Replacement
Briggs & Stratton Small Engine Ignition Coil Replacement Part # 593872
01:40
Part Replacement
Briggs & Stratton Small Engine Spark Plug Replacement Part # 692051
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com